Sell EN10305 Steel tubes for precision applications--Technical delivery conditions

1) Standard Name: EN10305  Steel tubes for precision applications--Technical delivery conditions

2) Monthly Capacity: 3500 tons.

3) Steel Grade: E235,E355, 25CrMo4,etc

3) Delivery Condition: BK, BKS, GBK, NBK,Stress Relief, Normalizing, Spheroidize Anneal, Annealing, Bright Annealing, Normalized, Quenched and Tempered, Solution Annealing, etc ;

4) Surface treatment: A210/A450-Temporary Coating, Special Coating, Galvanized, immersion oil, lacquer, passivation, phosphating,etc; Or Oil-dip paint black with two plastic caps on each end

5)  Inspection: Strictly according to the standard requirements and offer the original MTC (EN10204.3.1/3.1B)

6) Relevant Test: ASTM 450-Chemical Component Analysis,Mechanical Properties(Ultimate tensile strength,Yield strength,Elongation),Technics Properties(Flattening Test,Flaring Test,Bending Test,Hardness Test,Blow Test,etc), Exterior Size Inspection, Nondestructive electric Test,Hydrostatic Test;

4) Marking: As per customer's requirement

6)  Packing: Hexagonal bundles with several steel strips, Wrapped in waterproof paper, PVC sleeve,and sackcloth with several steel strips or packed in heavy tri-wall boxes, wooden boxes, wooden slats as requires;

7) Packing Type: Round , Square, Rectangle, Hexagon.  Streamline, etc;

9) Applications: Automobile and Bearing Industry, Mechanical and Structral Purpose,  Hydraulic and Petrochemical Purpose, etc.

8) Place of orgin: China

Mobile: +86 138 128 775 59 -->Terry(Chief Business Executive Officer)
Email: order@hc-pipe.cn

Commercial Information:
  1) Delivery                    :  Within 45 days ready at mill ;
  2) Min Order                 :  5 Tons;
  3) Packing way              :  As per our export standard for shipment ;
  4) Term of payment       :  30% T/T within 3 days after signing the contract, balance 70% before shipment. Or 30%T/T +70% irrepealable L/C ;
  5) Delivery Port              :  Shanghai Port ;
  6) Offer Validity              :  5-7 Days        ;
  7) Container                   :  20' or 40', etc ;
  8) Manufacture methods  :  Cold Finished method.