XLPE Insulated Power Cable

Detailed Product Description

This XLPE Insulated Power Cable series is mainly for laying indoor, tunnel, channel and under ground, shaft

with large differences of level and other conditions.

Rated voltage 10-220kV XLPE insulated power cables have been widely used in our country
with the advantages of excellent electric properties, high long term working

temperature, strong ability to resist short circuit, long service life, light
weight and without the limit of fall, easy to install, operate and maintain.

XLPE Insulated Power Cable of our factory are strictly produced according to the standards
of GB/T12706 (power cable with extruded insulation and their accessories

for rated voltages from 1kV up to 35kV) and GB/T11017 (power cable with cross-linked

polyethylene insulation and their accessories for rated voltage of 110kV).
The GB/T12706 is equal to IEC 60502 (1-30kV plastic insulated power cable) and
GB/T 11017 is equal to IEC 60840 (the test of 30kV -150kV extruding insulated power

cables). We can produce products complying with IEC 60502-0997 (rated voltage
1-30kV extruding insulated power cable and accessories) to meet the requirement
of our clients. We can produce XLPE power cables with special requirement and
higher properties according to clients' requirements. 

Characteristics of XLPE Insulated Power Cable:
1) The highest rated temperature is 90
2) The highest temperature of the conductor of cables shall be less than 250

(max. duration: 5s)
3) XLPE Insulated Power Cable can be laid without the limit of fall with enough mechanical pull,

but the single core cable cannot be laid in iron tube or cannot be fixed by circled

iron tools around the cables
4) The laying temperature of cables should not be lower than 0, When the ambient

temperature is below 0, the cables should be heated up to 0C or
higher with certain methods

Packing:
Wooden drum,steel wodden drum