Tray Brick-pressing Machine

A).Purpose of Tray Brick-pressing Machine:
  1.rotate in the completely-sealed condition, provide oil by pressure, lubricate by oil circulation, filter fat liquor many times,   compensate fuel tank of fat liquor cause the movable part sufficient lubrication, reduce the attrition;
  2.rotate the eccentric shaft with the crank gear separation, cause the crank gear vice- entire sealed;
  3.the piston sealed with multiple dustproof , adopt the high-strength rubber expansion and contraction wrap;
  4.use the spherical surface on  two ends , lubricate with oil supplied by pressure;
  5. The main bearing is made of the steel of high quality, which can satisfy the maximum work pressure of more than two times' intensity;
  6.improve the triangle quality to increase the rotational inertia, enlarge the crank gear diameter to enhance the driving moment and then  cause this machine pressure high, the electricity consumption low, the output  high;
  7.Using the automobile ten universal jointsthe, the rotation cross structure  can make rotation more flexible, steady and durable. Increasing  the steel addendum circle and locating with  three steel localizations, can make the addendum circle work more steadily, and make the outer not easily  worn;
  8.the seasoning organization uses  the worm gear vice- rotation, and the screw rod rises and falls to adjust the height of feeding.
B).main technical parameter of Tray Brick-pressing Machine: