PP-R/PE-RT/PEX Pipe Extrusion Line

Because of its distinguish phisical ,chemical characters ,low cost ,easy operation ,it is suitable for the cable protection pipe in the highway.

Based on Jingshengda`s excellent screw-making technology ,in 1999 Jingshengda succeeded in developing its own  high speed inner silicon layer composite pipes extrusion line. Because of its new design ,high automation ,continuous stable extrusion and other characters.

PE-RT/PP-R/PEX Pipe Extrusion Line

This line can also be used for extrusion of PP-RT/PP-R/PEX pipes .PP-R pipe is non-toxic ,heat-resistant. It has well hot-melting and recycleable characters. PEX pipes have excellent temperature resistance character. PE-RT pipe does not need the cross-link process.

PP-R/PE-RT/PEX  Pipe Extrusion Line

A. Equipment configurations as below:

1. SJ-65/30 single screw extruder

2.PP-R pipes special mould

3.Vaccum calibration cooling box

4.Cooling box

5.DY-120 hauling machine

6.Automatic cutting machine

7.Reverse bracket

B. Main technical parameters and equipment

1. SJ-65/30 single screw extruder

(1). Screw

Diameter: 65mm

L/D ratio: 30:1

(2). Barrel

Diameter: 100mm

 (3). Heating and cooling

Driving power of the fan: 180kw×4

(4).Speed reducer

(5). Amplidyne

Driving power: 45kw

(6). Electrical system

Control range: 0-399⁰C

2. PEX pipes special mould

Specification: 20-30

3. Vacuum calibrating cooling box

The length of the box: 6000mm

Driving power of the vacuum pump: 5.5kw

Driving power of the water pump: 5.5kw

Automatic control water line

Fore-and-aft move: 0.75kw

4. Cooling box

Length of the box: 6000mm

Driving power of the water pump: 3kw

5. Hauling machine

Type: two pedrails

Effective tangency length: 1200mm

Driving power of the amplidyne:2.2kw

6. Automatic cutting machine

Driving power of the amplidyne: 1.1kw

Pneumatic up

Pneumatic down

7. Reverse bracket

Length cutting: cooperation with the cutting machine

We give three quality guarantee for our equipment : machine parts are one year ,and the electric parts half a year. We also can train your engineers the operation and adjust the equipment until it can run normally ,just for free.