cylindrical roller bearing

Brand Name	cylindrical roller bearing		Place of Origin	China
Model Number	cylindrical roller bearing

cylindrical roller bearing LHB produces cylindrical roller bearings in many designs, dimension series and sizes. The majority are single row bearings with a cage. Single and double row full complement bearings (without cage) complete the LHB standard assortment for general engineering. Bearings with a cage can accommodate heavy radial loads and operate at high speeds. Full complement bearings are suitable for very heavy radial loads at moderate speeds.The LHB range of cylindrical roller bearings comprises the basic types ,single row cylindrical roller bearings, caged, mainly of the NU, NJ, NUP and N designs ;double row cylindrical roller bearings, caged, mainly of the NNU and NN designs;multi-row cylindrical roller bearings, caged etc. We can produce the diameter from 15mm~ 800mm LHB cylindrical roller bearings.Following is the internal structure of LHB different product descriptions. EC Optimized internal design incorporating more and/or larger rollers and with modified roller/end flange contact EW Enhanced design, press steel cage. EM Enhanced design, machined brass cage. J Pressed steel cage, roller centred, unhardened K Tapered bore, taper 1:12 M Two-piece machined brass cage, roller centred MA Two-piece machined brass cage, outer ring centred MB Two-piece machined brass cage, inner ring guided MBS As MB but with lubrication grooves in the guiding surfaces ML One-piece form-turned window-type brass cage, inner or outer ring centred MP One-piece window-type brass cage with milled, reamed or broached pockets, inner or outer ring centred MPS As MP but with lubrication grooves in the guiding surfaces MR One-piece form-turned window-type brass cage, roller centred N Snap ring groove in the outer ring NR Snap ring groove in the outer ring, with appropriate snap ring N1 One locating slot (notch) in one outer ring side face N2 Two locating slots 180° apart in one outer ring side face P Injection moulded cage of glass fibre reinforced polyamide 6,6, roller centred PH Injection moulded cage of glass fibre reinforced polyetheretherketone (PEEK), roller centred PHA Injection moulded cage of glass fibre reinforced polyetheretherketone (PEEK), outer ring centred S1 Bearing rings dimensionally stabilized for operating temperatures up to +200 °C S2 Bearing rings dimensionally stabilized for operating temperatures up to +250 °C TN9 Injection moulded cage of glass fibre reinforced polyamide 6,6 VC025 Bearing with specially wear-resistant raceways for applications in heavily contaminated environments VQ015 Inner ring with crowned raceway for increased permissible misalignment bearing,cylindrical roller bearing