Generator Controller With ASM Automatic Start Module For Generator Parts HGM6320

1.Automatic Start Module
2.Automatic Mains Failure Module
3.single phase 2 wires
4.three phase 3 wires
Generator Controller With ASM Automatic Start Module For Generator Parts HGM6320
SUMMARY
HGM6300 Series generator controller integrating digital, intelligent and network techniques
is used for automatic control system of diesel generator. It can carry out functions including
automatic start/stop, data measure and alarming. The controller uses LCD display,
optional Chinese and English display interface with operation easy and reliable.
HGM6300 Series generator controller uses micro-processing technique which can carry out precision measure, constant value adjustment,
timing and threshold setting and etc. of multi-parameters. It can be widely used in all types of generator automatic control system for
compact structure, advanced circuits, simple connections and high reliability.
PERFORMANCE AND CHARACTERISTICS
◆ HGM6300 controller has two types:
HGM6310: ASM (Automatic Start Module)
HGM6320: AMF (Automatic Mains Failure Module)
◆ Using microprocessor as a core, graphics LCD with big screen and backlight,
display between Chinese and English, key touch for operation.
◆ Precision measure and display of
mains voltage
mains frequency (Hz)
mains active power (kW)
mains apparent power (kVA)
mains power factor
generator voltage
generator current
generator frequency (Hz)
generator active power (kW)
generator apparent power (kVA)
generator power factor
generator hours count
generator cumulate electric energy (kWh)
generator temperature
generator pressure
generator fuel level
start battery voltage
◆ Configurable single phase 2 wires or three phase 3 wires or three phase 4 wires AC system input;
◆ Control protection: Automatic start/stop, load transfer and alarming of generator;
◆ Parameters setting: Allow user to modify setting and store them inside internal FLASH memory,
the parameters can not be lost even with power down.
◆Three channel analog inputs, may joint with Resistive-type temperature/ pressure/ fuel level sensors,
Several temperature and pressure sensors can be used directly (ie. VDO, DATCON, CUMMINS),
also may select “user defined” sensor via entering 16 point curves;
◆ Functions including RTC(real time clock) and hours count;
◆ Display of generator cumulated electric energy;
◆ Security password-protected programming levels.
◆ Several crank success conditions are optional;
◆ Built-in speed/frequency detecting units can accurately judge the states such as crank success and over speed;
◆ 99 historical records can be stored circularly and inquiring of the records can be made on site;
◆ Power supply range is wide, accommodating to different starting battery voltage environments;
◆ All parameters use digital modulation, abandoning analog modulation using conventional
electronic potentiometer, reliability and stability are increased;
◆ Built-in watch dog can never be dead halt, ensuring smooth program execution;
◆ Modular configuration design, inserted type connection terminals, flush type installation,
compact structure, easy installation.