Home > Products > New product > 200 Polyester Putty
200 Polyester Putty
- T/T L/C D/P D/A
- 7 days
You May Like
Product Details
Place of Origin | China |
Product Description
200 Polyester Putty
Ingredients:
Unsaturated polyesters resins, modified resin, color pigment, stuffing, anti sediment materials, auxiliary agent and firming agent mixing ratio 100:2.
Characteristics:
It is exquisite and has good scratching performance. Resistance to some certain of baking. Mainly being applied to the leveling up and decoration of the blemishes, such as the drop pits of keelsons, pin-shaped cavities, crackles, and little welding lines etc. before closing the floating coat in the painting technics of furniture, building material and machine equipment. To satisfy the leveling and smoothness of the keelsons before painting the surface. It is also of good repairing for glass reinforced plastics.
Main technical standard:
Item |
Index |
Testing Standard |
Outward appearance |
The color is unanimous, and there are no visible particles by naked eye. |
Visual examination |
Air drying |
Meet the customers’ requirements |
GB/T1728-79 |
Consistency |
9-12cm (except for the specialities) |
GB/T1749 |
Scratching performance |
Good handling |
|
Burnishing performance |
Burnishing easy |
|
Resistance to high temperature |
There is no bubbling and cracking under baking at 100℃ after drying |
|
There is no bubbling and cracking under baking at 80℃ after gelling |
|
|
Pliability |
≤90mm |
GB/T1748 |
Impact Strength |
≥8kg.cm (or 20kg.cm Not falling off) |
GB/T1732 |
Adhesive force |
≥20Kg/1.2cm2 |
GB/T5210 |
Reference for construction:
1、 Evenly mix the main ash and firming agent with the proportion being 100:2 (make the color unanimous), and using up them within the gelation time.
2、 Scratch the putty which has already finely mixed on the primer paint of double components after burnishing or the surface of cold-rolled sheet which has already been finished processing. If the thickly scratching is required, you’d better thinly scratch for many times to meet the required thickness. If some air bubbles infiltrate while scratching, you should thoroughly strickle it by means of scraper, so as to ensure the good adhesive force. The best wet milling time is 0.5-1h after scratching.2-3h is the best dry milling time.
Notes:
1、 Once the putty mix firming agent, don’t put it into can and cover it after using in case that the impregnant volatilization may result in the deterioration of main ash.
2、 The solidifying period of coating film will extend if the temperature is high or low. The consistence and gelation time of putty may adjust according to the requirements of customers’.
3、 This product is unsuitable for directly scratching on galvanization plates.
4、 Its quality can be guaranteed for 6 months since the date of its production. If it does not beyond this period, it can be used continuously.
Contact Us
- Foshan Shunde Himens Industrial CO.,Ltd
- Contact nameAmy Chat Now
- Phone0757-28686119
- AddressNo.2 Liangjun Middle Road,GUanghua,Xingtan,Shunde,Foshan, Rizhao, Shandong
Product Categories
New product |
New Products
-
198# Polyester Putty
-
2325 Polyester Putty
-
303 Welding Line Polyester Putty
-
H305# Conductive Polyester Putty
-
318 Polyester Putty
-
307 Light Weight Polyester Putty
-
2327 Polyester Putty
-
2501 Polyester Putty
-
2515 Polyester Putty
-
2610 Polyester Putty
-
H388 Zink Polyester Putty
-
H2210# Pinhole-filling Super Fine Putty
Popular Searches
- caustic soda flake
- sodium hydroxide
- caustic soda
- chelate agent
- Activated Carbon
- activated charcoal
- active carbon
- anthracite filter media
- Granular Activated Carbon
- Coconut Shell Activated Carbon
- Powder Activated Carbon
- Nut Shell Activated Carbon
- Honeycomb Activated Carbon
- Coal Activated Carbon
- Wood Activated Carbon
- Activated Charcoal Carbon
- Silicone Surfactant
- molecular sieve
- silica gel
- alumina ball
- zeolite molecular sieve
- Molecular Sieve Adsorbent
- Silica Gel Adsorbent
- Molecular Sieve Desiccant Adsorbent
- Activated Carbon Adsorbent
- Molecular Sieve Zeolite Adsorbent
- silicone rubber
- silicone material
- silicon gel
- cleaning agent
Recommended Products
- Anionic Polyacrylamide (APAM)
- ferric phosphate anhydrous
- iron iii oxide hydroxide battery material for Lithium Iron Phosphate
- iron-chromium liquid flow battery electrolyte
- ferrous chromium chloride for lithium iron phosphate battery
- compound ferrous chromium chloride solid cathode material of lithium iron phosphate battery
- High-quality Dimethyl Silicone Oil PDMS 500cst
- PU Water Based Mold Release Agent
- Food & Medical Grade Liquid Silicone Rubber Mold Translucent
- Transparent Liquid Silicone Rubber For Foot Care Products
- PDMS 350cst High-quality Dimethyl Silicone Oil
- CAS 497-19-8 Sodium Carbonate Na2CO3 China Factory Manufacturer Industrial Grade Soda Ash
Find Similar Products By Category
- Chemicals > Chemical Auxiliary & Catalyst > Chemical Auxiliary
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Amy
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile