NC printing net dryer Textile Drying Machine with electrical heating or steam heating

NC printing net dryer Textile Drying Machine with electrical heating or steam heating

KD-200 NC printing net dryer

Product use:

This machine is mainly used to dry after NC printing, it is the newest product which imitated from GERMAN Thies. It has low noise, small recycle air-speed to dry. It can save energy, the fiber after drying can get perfect hand-feel, and without staining.

The process flow

? Net-belt infrared correction → front head stock → 1st drying oven 70℃ → 2nd drying oven 80℃ → 3rd drying oven 90℃(after you setting the temperature, the machine can auto-control the temperature, the recycle fan AC adjustment.) → rear head stock to outlet? → yardstick inspecting and winding machine is cared by users.? → finishing product

mechanical structure

?? Front head are welded by12# channel steel and 8mm steel plate

?? Correcting: supported by Φ50mm guide net tube, 2 end are mounted by bearing and bearing seat.

?? Chamber: frame is welded by 8# channel steel.

?? Door: edge bended and welded by 1.2 cold forming steel plate, insulation layer are made by asbestos fiber, door sealing are made by silicon rubber, hinge connect together.

?? Temperature controlled valve: automatic temperature controlled valve, or silicon control temperature(electrical heating)

?? Frequency convertor: brand WoLu

?? Circulation fan unit: use axial-flow type circulation fan, fan blade are casted by Al alloy, and both dynamic and static balance are adjustment, motor’s brand is WanNan

?? Radiator: made by Φ25×2 seamless steel tube and 0.5mm Al belt. Good performance.

?? Net belt: use glass fiber high temperature net belt, surface coated by Teflon material, not staining ink

?? Cabinet: use 1.2mm cold draw steel plate, L×W×H:400×550×1100mm

?? Electrical element: Brand Chint, power wire, cable, channel is free.

?? Painting material: use green painting or other color appointed by customer.

?? Out dimensions: L×W×H:7580×3000×1600mm

Remark: electrical heating or steam heating chosen by customer, for electrical heating: speed 1-2m/min, start first chamber; speed 3.4m/min, start first and second chambers; speed over 4m/min, start all chambers.