Custom emulsion acrylic wall paint waterproof living room emulsion coating

Exterior Wall Water-borne Closed Primer is a kind of special seal coating for new and old wall base, it has a strong alkali resistance the substrate, protect the paint effectively, it make the surface coating avoid the destruction? from alkaline cement and provide a better basis for surface coating.

Product features
1. Superior high quality raw material: 100% pure acrylic import original high-tech products, super waterproof resistance and alkali breathable high-performance resin.
2. 1. The champion of the resistance to alkali mould-proof: superior resistance to alkali mould-proof and strong adhesion performance, make the alkaline substances cannot penetrate inside the wall, to prevent yellowing of metope and paint film from falling out.
3. save money, material and process, high solid content, not only can save the amount of paint, but also make it easier for paint construction.
4. It has strong weathering resistance ability,? prevent color fade, prevent paint? cracking off, improve the durability of the coating , its durability and colour protected by a strong finish .
5. It can be used interior and exterior wall: this marked characteristics is generally brand cannot do, its advantage is to provide clients with convenient and the user can save money.
6. Our company promise the product quality can keep ten years.

Scope of application
Used for both inside and outside decoration on the surface of the wall body sealing wall primer.

Product parameter
Type: It is manufactured by 100% imported pure acid resin.
Sheen: hone finished
Methods: brushing, rolling and spraying
Paint consumption:10-13 square meters/liter/ layer
Dilution: diluted with water, the maximum of water addition is 20% (mass ratio)
Recoat time: 2 h (25 ℃)
surface dry: about 30 min

Quality standard: in accordance with the national standard GB/T9755-2001
Safety performance: \"Environment mark product\" in accordance with national standards.
Interior decoration material safety standards CB18528-2001
Suggested use:1 primer and 2 finish
Storage: use cap sealed tightly, stored in (more than 0 ℃, 35 ℃ below) a cool, dry place.
Cleaning tools: with clean water.
Packing specification: 18 L / 5 L/barrel.

Construction technology
1. The base surface must be clean, dry, firm and no dust. New cement metope to maintain at least for a month, more than 7 weeks in winter. Washing dust and bacterium from old wall with high pressure, cleaning and airing, ensure that no oil and without mildew algae and other attached objects. The mold wall use sand paper to grind, so that remove the mould, it is necessary to brush again washing mold water , and then clean again with clean water,? paint again after dry.
2. The construction temperature > 5 ℃, humidity < 85%, PH < 10, wall\'s humidity < 6%, putty is fully dry, it can construction when meet? above conditions.
3. Please do not construction at the same time with polyester paint, should construction polyester paint after the emulsion paint dry.
4. Before construction should stir well, and the construction according to the requirements.
5. Protection: more than seven days.

The coating process
1. Clean up the scene, cover the ground and the furniture with matting, and use the sealing tape to separate different color area;
2. Inspect construction wall condition and in accordance with the requirements of construction to add water to dilute. There are too much water will effect and quality and gloss of the paint,? if there are too little water, it will affect brushing;
3. Brush: should be from top to bottom, vertical direction and then horizontal direction, brush evenly,? finally comb brush marks gently in vertical direction. if the operation is not skilled, the coating will produce brush marks, sagging, uneven coating defects.
4. Roller coating: brush in \"Z\" type first, and then, roll in vertical direction one time in turns, at last available wool brush combing roller brush marks in vertical direction, choose proper roller, brush touch paint evenly.
5. Cleaning: clean all tools with clean water immediately, to prevent the brush roller hardening.

Coating techniques: if you use the same color different batch of paint brush on the same plane, and they should be mixed in a larger container before using, in order to make sure the color uniformity of the whole.

Attention
Health, environmental protection, application instructions:
1. Do not swallow, if liquid paint splashed into eye accidentally, clean with water immediately;
2. Paint liquid waste disposal, it shall comply w