BMW OPS+SSS

SSS

Info

The "SSSR3" is the new version of the "Software Service Station SSS" and "SSSR2" which has been introduced in the authorised workshops of BMW AG wordwide since early 2003. The "SSSR3" is virtually identical to the "SSS" and "SSSR2" in terms of visual appearance and component configuration.

It is an addition to the "DISplus" and "Group Tester One(GT1)" diagnostic systems.

Together with the "Optical(test) and Programming System Ops it provides an efficient and versatile platform for the programming individualisation and encoding of BMW vehicles.

FEATURES

1. Soft ware self-upgrade.

2. CPU: P4 3.0, support Dual Core.

3. High speed serial-port hard disk, ensure the program speed.

4. SSS original main board, give you the stable and safe programming circumstance.

5. The whole car's 90% programming only needs 2 minutes.

6. CAN diagnose of BMW after 2007 is available for OPS

7. OPS is the necessary tool for all BMW & MINI BMW's programming

8. All BMW & MINI BMW's programming, the whole car's codes setting and individuation set up is available for SSS.

9.English&Chinese are available.

 Configurations:

 1.SSS PC host

2.SSS BASE DVD + SSS PROGRAM DVD V33.

OPS

INTRODUCTION

OPS is mainly used for diagnosis and programming BMW vehicles after E65 series.OPS unit with DIS software is used for diagnosis,which is carried out via OBD-II socket.OPS unit with SSS software is used for programming,which is carried out via OBD-II socket and MOST socket.

FEATURES

1.it can work with all vehicles after BMW E60,as original do.

2.The OPS (Optical and Programming System) can be used especially to program vehicles from E65 as it allows, in addition to vehicle access via the OBD II interface, access to the MOST bus. 3.There is no difference in the programming times when using the OPPS or OPS as the vehicle interface.

4.The optical programming system (OPS) for programming vehicles is handled in exactly the same way as the OPPS. 

5.The connection to the workshop network is effected via network cable to a free network connection.

6.Like the OPPS, the OPS does not have an air interface, as the high bandwidth required for programming can currently only be achieved by means of a cable connection

STANDARD CONFIG:

1.OPS multiplexer

2.OBD-II diagnostic cable

3.LAN cable

4.MOST cable