Standalone Photoelectric Smoke Detector MCU Technology

Specifications

Optical smoke detector ,under BSI approval, and can be calibrated into either UL, VDS, NF Standards. This smoke detector features UL-approved Photoelectric sensing components with precise smoke detection. and long life (18 months) 9V battery operation (9V UltralifeLithium battery model for 10-year life is available too).

Optical smoke detector features and sepcifications:

• Features:

o Works on principle that infrared scatters on smoke surface

o Probes smoke which is generated by incomplete combustion at initial stage of fire

o Smoke detector consists of photoelectric system, signal processing identification and alarm circuit

o Infrared scatters on surface of smoke when smoke enters darkroom of detector

o Photoelectric diode receives scattered light and generates photoelectric signal current

o Photoelectric signal generates alarm signal after being processed by identification circuit, accordingly purpose of alarming is achieved

• Specifications:

Material: ABS plastic

Power supply: 9V DC Block battery/PP3

Quiescent current: 8μA

Alarm current: 16mA

Operating temperature: -10°C ~ +50°C

Humidity: 0 to 95%(40±2°C),no condensing or icing

Alarm decibel: Louder than 85dB at 10feet(3 meters)

Test button: To verify the proper functioning of smoke alarm

Low voltage warning: Smoke alarm beeps every 40 seconds for 30 days (minimum) to indicate a need of battery replacement

Smoke sensitivity: 0.086 dB/m to 0.140 dB/m

PACKING:

Each product with installation hardware and manual into a gift box 10.5*10.5*4cm, then 100boxes into a carton 55.5*44.5*23.5cm, 14.5/15.5KGS