Z Purlin Roll Forming Machine

Z Purlin Roll Forming Machine

Feature: Our Z section roll forming machine is different from other manufactures.Our machine adopt pre-cutting, which can be used for a longer time than after-cutting. For after-cutting, when the cutter was used for settled times it will be out of use and you need new mould. Its troublesome to change the new mould and its expensive. Our machine cuts before the Z shape is formed,so that the cutting part can be much saved. Our machine can cut about 500,000 times, whereas the machine from other manufacturers can only cut 20,000 times at most.

Usage:The Z-shaped purlines formed by this machine have excellent anti-bending property and are easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale construction, such as factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, garden and so on.

MACHINE COMPONENTS:
(1) Hydraulic Un-coiler 1 set
(2) Leveling Device 1 set
(3) Roll-Forming M/C 1 set
(4) Hydraulic cutting (with four cutting mould) 1 set
(5) PLC Control System 1 set
(6) Product rack (un-powered) 1 set

TECHNICAL SPECIFICATION
(1) Hydraulic Un-coiler:
Un-powered; single head; max. Capacity: 3000kg;
Coil inner-diameter: 508mm

(2) Leveling Device:
It used for making the material flat before feeding into the roll forming machine.

(3) Roll-Forming M/C:
13main steps and 7 auxiliary steps to form; Material of Roller: GCr 15;
It can make all the size of profile in the table through changing the position of the rollers.
Voltage:380V/50Hz Forming speed:0-10m/min;

(4) Hydraulic Cutting:
Stop to cut ,Post cut Cutting tool material:Cr12,
tolerance of the cutting length 4mm
It has four cutting mould with the line.
If the customer wants to more cutting mould, he has to pay for the extra moulds.

(5) PLC Control System:
Using Mitsubishi PLC Control the quantity, length automatically, LCD screen,
Option Hydraulic un-coiler
Hydraulic system to expand coil inner hole;
Frequency Inverter to regulate turning speed,
Automatic stop device;Load capacity = Max.3Tons;

Suitable material for Production:
C & Z Purlin mainly use hot roll steel strip or hot dip galvanized steel strip at thickness 1.5~3.2mm. it is roll formed by C or Z shape roll forming machine

Working Flow:
Decoiling the SheetSheet GuidingCoil Strip LevelingRoll FormingPunching for horizontal hole/vertical hole Measure Length Cutting the PanelPanels to the Supporter.

Product feature and usage:
The products of C or Z shape purline forming machine have excellent anti-bending property and are
easy to install. They are widely used as the supporter of roof and wall in large-scale and mid-scale
construction, such as factory, warehouse, garage, exhibition center, cinema, theatre, garden and so on.

Contact Name: Tony Tang 
Email: tony@mtc-china.com
MSN:tanglei_tony@hotmail.com
Skype: tangleitony
Tel: 0086-21-67228332 
Fax: 0086-21-67228302
Cell: 0086-18001958638
Website:
OR:  
OR:  

Business focus: Roll Forming Machine, C, Z, U, W Purlin Forming Machine, Roof Tile Forming Machine, Eps, Pu, Rockwool Sandwich Panel