Home > Products > Indicator LED > 590nm super high brightness light emitting diodes yellow Indicator led 400*340*345cm
590nm super high brightness light emitting diodes yellow Indicator led 400*340*345cm
USD $ 0.01 ( - $ 0.01 (
/ Piece
1 Piece(Min.Order)
- T/T L/C D/P D/A
- 7 days
You May Like
-
940nm Led Infrared Emitting Diode High Power 0.06w ir emitting diode
-
3mm 940nm Infrared LED Emitter Viewing Angle 45 Deg , light emitting diode led
-
Blue light emitting diode 5mm round for Color Graphic Signs outdoor advertising
-
5mm round pure green color Indicator LED in 9.Back lighting outdoor advertising Circuit board
-
5mm Round Infrared Emitting Diode Dip 3mm infrared led 940nm
-
3mm bluish green 505nm high brightness light emitting diodes / infrared led emitter
Product Details
| Brand Name | DOUBLE LIGHT | Place of Origin | China | |
| Model Number | DL-503YDA-1Y60 |
Product Description
590nm super high brightness light emitting diodes yellow Indicator led 400*340*345cm
| Part No. | Chip Material | Lens Color | Source Color |
| DL-503YDA-1Y60 | GaAlAs | Red Diffused | ultra Red |
?
Features: Standard T-1 3/4 Type. Choice of various color. Available on tape and reel. Reliable and robust. The product itself will remain within RoHS compliant Version. Descriptions: The series is specially designed for applications requiring higher brightness. The LED lamps are available with different colors, intensities. Applications: TV set. Monitor. Telephone. Computer. Circuit board. Status indicators. Commercial use. Advertising Signs. Back lighting. Package Dimension:Notes:
All dimensions are in millimeters (inches). Tolerance is ± 0.25mm (.010″) unless otherwise noted. Protruded resin under flange is 1.00mm (.039″) max. Specifications are subject to change without notice. Absolute Maximum Ratings at Ta=25℃| Parameters | Symbol | Max. | Unit |
| Power Dissipation | PD | 78 | mW |
|
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) |
IFP | 100 | mA |
| Forward Current | IF | 30 | mA |
| Reverse Voltage | VR | 5 | V |
| Operating Temperature Range | Topr | -40℃ to +80℃ | |
| Storage Temperature Range | Tstg | -40℃ to +85℃ | |
|
Lead Soldering Temperature [4mm (.157″) From Body] |
Tsld | 260℃ for 5 Seconds | |
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | 30 | 80 | --- | mcd | IF=20mA (Note 1) |
| Viewing Angle * | 2θ1/2 | --- | 60 | --- | Deg | IF=20mA (Note 2) |
| Peak Emission Wavelength | λp | --- | 592 | --- | nm | IF=20mA |
| Dominant Wavelength | λd | --- | 589 | --- | nm | IF=20mA (Note 3) |
| Spectrum Radiation Bandwidth | Δλ | --- | 35 | --- | nm | IF=20mA |
| Forward Voltage | VF | 1.60 | 2.20 | 2.60 | V | IF=20mA |
| Reverse Current | IR | --- | --- | 10 | μA | VR=5V |
Notes:
Luminous Intensity Measurement allowance is ± 10%. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Typical Electrical / Optical Characteristics Curves(25℃ Ambient Temperature Unless Otherwise Noted)
Reliability Test Items And Conditions:The reliability of products shall be satisfied with items listed below:
Confidence level: 90%. LTPD: 10%.
1) Test Items and Results:
