Home > Products > Low Temperature Carbon Steel Pipe > Low Temperature Cold Drawn Seamless Steel Tube With Reducer Ripple
Low Temperature Cold Drawn Seamless Steel Tube With Reducer Ripple
- T/T L/C D/P D/A
- 7 days
You May Like
-
Cold drawn welded Low Temperature Carbon Steel Pipe ASTM SA333
-
ASTM SA333 Pipe Low Temperature Carbon Steel Pipe Round Shape
-
Cold Drawn Low Temperature Carbon Steel Pipe / ASME SA333 GRADE 6 Pipe
-
Martensitic / Ferritic Ss Seamless Pipe For High Temperature Service
-
Round Shape Ferritic Stainless Steel Seamless Pipe For General Corrosion Resisting
-
Ferritic Stainless Steel ASTM A268 Seamless Stainless Steel Tubing Cold Drawn
Product Details
| Brand Name | HENGLONG | Place of Origin | China | |
Product Description
Certification:ISO9001, OHSAS18001, ISO14001, PED97/23/EC
ASME SA333 Seamless steel pipes for low temperature service
Standard: ASTM A333 / ASME SA333
Steel grade: alloy steel
A 999/A 999M specification for general requirements for alloy steel pipe
| ? | Grade 1 | Grade 3 | Grade 6 |
| Carbon, max, % | 0.30 | 0.19 | 0.30 |
| Manganese, % | 0.40-1.06 | 0.31-0.64 | 0.29-1.06 |
| Phosphorous, max. % | 0.025 | 0.025 | 0.025 |
| Sulfur, max, % | 0.025 | 0.025 | 0.025 |
| Silicon | - | 0.18-0.37 | 0.10 min |
| Nickel | - | 3.18-3.82 | - |
Process: cold drawn seamless pipe
The tubes cover nominal (average) wall thickness.
Application: Tube for low temperature service
Dimensional range:
OD: 19.05-76.2mm
Any specific size is to be discussed before offer
The tube be 100% eddy current tested
Ultrasonic test is as option
Straightness ≤1mm/1000mm
Roughness: Ra ≤0.8
Mechanical properties
| ? | Grade 1 | Grade 3 | Grade 6 |
| Tensile strength, min, MPa | 380 | 450 | 415 |
| Yield strength, min, MPa | 205 | 240 | 240 |
| ? | Transverse | Transverse | Transverse |
|
Elongation in 2 in. or 50mm, (or 4D), min, %: Basic minimum elongation for walls 5?16 in. [8 mm] and over in thickness, strip tests, and for all small sizes tested in full section |
25 | 20 | 16.5 |
| When standard round 2-in. or 50-mm gage length or proportionally smaller size test specimen with the gage length equal to 4D (4 times the diameter) is used | 20 | 14 | 12 |
Test
One notched bar impact test, consisting of breaking three specimens, shall be made from each heat represented in a heat-treatment load on specimens taken from the finished pipe. For material heat treated in a batch-type furnace, tests shall be made on 5% of the pipe from each lot. When heat treated by the continuous process, tests shall be made on a sufficient number of pipe to constitute 5% of the lot, but in no case less than 2 pipes. Each length of pipe shall be subjected to the hydrostatic test or the nondestructive electric test. The type of test to be used shall be at the option of the manufacturer, unless otherwise specified in the purchase order. Nondestructive Electric Test—Nondestructive electric tests shall be in accordance with Specification A 999/A 999M, with the following addition:If the test signals were produced by visual imperfections, the pipe may be accepted based on visual examination, provided the imperfection is less than 0.004 in. (0.1 mm) or 12? % of the specified wall thickness (whichever is greater).
Visual imperfections:
? ? ? Surface roughness
? ? ? Straightener marks
Cutting chips
Steel die stamps
Stop marks, or
Pipe reducer ripple
Tubes shall be delivered with square cut ends. The ends are free of excessive burrs.
The tubes are bundled in the waterproof plastic sheet and packed in the wooden cases
The case is most suitable for hanging by forklift.
EN10204-3.1 MTC shall be issued
EN10204-3.2 MTC is as option
Contact Us
- Zhangjiagang Bonded Area Henglong Steel Tube Co., Ltd.
- Contact nameMr. John Chen Chat Now
- Phone86-512-58328328
- AddressNo.5, Taiwan Road, Zhangjiagang Bonded Area, Huzhou, Zhejiang
Product Categories
New Products
-
ASTM A268 Seamless Ferritic Stainless Steel Tubing For Ultrasonic Examination
-
Cold Drawn Stainless Steel Seamless Tube For Heat Exchanger ASTM A268 / ASME SA268
-
AISI 444 Ferritic Stainless Steel Tube / Martensitic Ss Tube
-
Ferritic Seamless Stainless Steel Tubing For General Service
-
ASTM A268 Ferritic Stainless Steel Tubing Cold Drawn Process
-
Heat Exchanger Boiler Steel Tubes Cold Drawn Up To 24m Length
-
Superheaters Seamless Steel Boiler Tubes Cold Drawing Welded Steel Tube
-
Carbon Steel Boiler Steel Tubes With Cold Drawn Process , Boiler Water Pipe
-
Good Hardness Boiler Steel Tubes Seamless Carbon Steel Tubes
-
Heat Treatment Seamless Alloy Boiler Steel Tubes OD 12.7mm -76.2mm
-
ASME SA192 Carbon Steel Rolling Boiler Tubes / Seamless Boiler Tubes
-
Carbon Steel High Pressure Boiler Steel Tubes Seamless ASME SA192
-
ASME SA209 Seamless Alloy Steel Boiler Heat Exchanger Tubes Round Shape
-
Round Cold Drawn Seamless Boiler Steel Tubes ASME SA210 Up To 24m Length
-
Heat Exchanger Seamless Carbon Steel Boiler Tubes ASME SA213 T5
-
ASME SA213 T5 Seamless Carbon Steel Boiler Steel Tubes For Tubular Heat Exchangers
-
ASME SA213 T22 Steam Boiler Piping Alloy Steel For Similar Heat Transfer
-
Boiler Steel Tubes Seamless Full - Annealed With Square Cut Ends ASME SA213 T23
-
Seamless Carbon Steel Steam Boiler Tubes For Heat Exchanger ASME SA213 T91
-
Black Carbon Steel Thick Wall Steel Tube For Heat Exchanger ASTM A214
-
Round Seamless Steel Heat Exchanger Tubes Not Exceeding 72HRB
-
Carbon Steel Seamless Heat Exchanger Tubes Round Metal Tube Minimum Wall Thickness
-
Round Metal Tube Heat Exchangers Low Carbon Steel ASTM A179 / ASME SA179
-
Heat Transfer Apparatus Seamless Carbon Steel Tube / Cold Drawn Steel Pipe
Popular Searches
- rivet making machine
- threading machine
- roll groover
- pipe thread cutter
- Thread Rolling Machine
- Cold Heading Machine
- Forging Press Machine
- bolt former
- Metal Forging Machinery
- Cold Forging Machine
- Hot Forging Machine
- Metal Forging Machine
- rolling equipment
- rolling machine
- hydraulic sheet roller
- nail production line
- metal rolling machine
- electric rolling machine
- tube shaping machine
- heading machine
- cold header
- part former
- Flange Making Machine
- Forging Press
- Bolt Making Machine
- Rebar Threading Machine
- Mould Machine
- Mould Making Machine
- Forging Machine
- fastener making machine
Recommended Products
- Long Bar Hardening And Tempering Furnace Manufacturer - Forever
- Long Bar Quenching And Tempering Furnace Supplier
- Bar / Rod Induction Heat Treatment Machine
- Induction Heat Treatment Machine For Steel Bar
- Automatic feeder bar induction heat treatment equipment
- Advanced Long Bar Induction Quenching and Tempering Machine
- Long Bar & Rod Induction Quenching and Tempering Machine
- Long Bar & Rod Induction Quenching and Tempering Machine
- Long Bar & Rod Heat Treatment Machine
- Steel Bar & Rod Induction Heat Treatment Furnace Manufacturer
- Long Bar & Rod Heat Treatment Production Line
- Long Bar & Rod Induction Hardening and Tempering Machine - Forever Manufacturer
Find Similar Products By Category
- Manufacturing & Processing Machinery > Metallic Processing Machinery > Metal Forging Machinery
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mr. John Chen
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile