Home > Products > Submersible Sewage Pump > High Head Vertical Axial Submersible Drainage Pump SUS304 60HZ Single Stage
High Head Vertical Axial Submersible Drainage Pump SUS304 60HZ Single Stage
- T/T L/C D/P D/A
- 7 days
You May Like
-
Commercial Rigid Portable Submersible Sewer Pump Motor Drive With Axial Flow Propeller
-
Axial Flow Electric Submersible Sewage Pump , 220 Volt Large Submersible Pumps
-
Large Volume Submersible Sewage Pump Installation Easy For Waste Water Treatment System
-
Electric Axial Propeller Irrigation Dirty Water Submersible Pump High Efficiency
-
Low Noise Axial Flow Submersible Effluent Pump Cast Iron High Performance
-
Axial Flow Ventilation Submersible Dirty Water Pump Single Stage With Motor Drive
Product Details
| Brand Name | GSD | Place of Origin | China | |
| Model Number | ZDB/HDB |
Product Description
Certification:CE,ISO,SPAN,ECA
High Head Vertical Axial Submersible Drainage Pump SUS304 60HZ Single Stage?
Application:
| 1 | The two models ZDB and HDB can also be used in supply and sewerage water of factory, mine, dock, urban construction, |
| 2 | water supply works and power station. |
| 3 | It is applicable for the occasion where the water level changes greatly and the requirement to the lift head is high. |
Features:
| 1 | Submersible electric pump has double and triple mechanical seal and F grand insulation (155oC thermostable ) with protection grand IP68 (IEC). The pump has hydraulic model of nationwide unified design, which has high reliability and has the same performance of the conventional hydraulic pump so that the customer can select the model easily. |
| 2 | As its operation submerged into water, the electric pump can greatly simplify geotechnical engineering and building structure engineering of pump station, reduce erection space and save 30%-40% construction cost. |
| 3 | Convenient operation, and easy to realize remote control and automatic control. |
Model number description:
500: Nominal water outlet caliber of pump (mm)
Z: Axial flow
DB: Electric pump
70: 1/10 of pump specific speed
J: New design, speed down
Maintenance:
Measure the insulation resistance with megohm meter once a month and at least operate the pump for 30 minutes to prevent from rusting during shutdown.
Storage:
It is recommended that the user takes the electric pump out of pit shaft if the pump has not been in operation for long time (over three months). Then the user should do simple decontamination and rust protection, then store the electric pump in draughty and dry place without exposure to direct sunshine to ensure the perfect condition of the pump. Perform barring 1 time about every month.
Construction:
Performance parameter:
600ZDB-50:
| Installation angle |
Capacity | Head (m) |
Speed | Power kW |
Eff. % |
D(mm) Impeller diameter |
||
| m3/h | l/s | r/min | shaft power | Motor power | ||||
| -4° | 2812 | 781 | 9.02 | 730 | 86.5 | 110 | 79.81 | 550 |
| 3222 | 895 | 7.47 | 79.70 | 82.20 | ||||
| 3668 | 1019 | 4.86 | 64.9 | 74.84 | ||||
| -2° | 2981 | 828 | 9.15 | 92.50 | 80.29 | |||
| 3434 | 954 | 7.56 | 86.00 | 82.20 | ||||
| 3917 | 1088 | 4.98 | 70.9 | 74.97 | ||||
| 0° | 3179 | 883 | 9.30 | 99.60 | 80.82 | |||
| 3884 | 1079 | 7.66 | 98.60 | 82.20 | ||||
| 4180 | 1161 | 5.12 | 77.3 | 75.42 | ||||
| +2° | 3391 | 942 | 9.48 | 108.00 | 132 | 81.05 | ||
| 3902 | 1084 | 7.78 | 100.60 | 82.20 | ||||
| 4421 | 1228 | 5.25 | 84.6 | 74.71 | ||||
| +4° | 3665 | 1018 | 9.73 | 119.5 | 81.23 | |||
| 4180 | 1161 | 7.92 | 109.70 | 82.20 | ||||
| 4666 | 1296 | 5.40 | 92.2 | 74.41 | ||||
600ZDB-70:
