Radiography NDT Inspection Equipment , Safe DC X Ray NDT Flaw Detector

Radiography NDT Inspection Equipment , Safe DC X Ray NDT Flaw Detector ?

Applications:
- X-ray flaw detection of welds in the field
- X-ray flaw detection of boilers and pipe connectors
- X-ray flaw detection of welds in power and petrochemical industry

Working Conditions
Work Environment
Cooling: Air Forced Cooling
Working method: force1:1
(AC)Input power: 185~245V

Test Condition
Inspection material: A3 steel
focal length: 600mm
Time of exposure: 5min
Double intensifying screen: 0.02mm
Negative: TianJin III
Density: ≥1.8

X-ray flow detector can be used in non destructive testing (NDT) of thin iron plate, aluminum material, rubber and so on. Our portable X-ray flaw detectors are designed to offer the reliable and efficient service on Radiographic Testing (RT); they are stable and reliable even in bad environment working conditions like varying temperature and humidity. Our X-ray flaw detectors with light weight and easy to carry in the testing field; the constant potential output for the high resolution imaging.

Our controller has many features, like automatically adjust the tube voltage and current to keep the stable voltage and current in X-ray tube. It has real time clock and EEPROM to record the operations, and base on the operation record, the controller automatically self-diagnostic and decide the warm-up process. The controller is light weight and work without noise.

Characteristics
- The X-ray flaw detector with high reliability and stable even in bad environment working conditions
- The high radiation output of X-ray flaw detector will increase the film contrast for higher radiographic imaging.
- The X-ray flaw detector with light weight and easy to carry
- The controller is smart and can warm-up the x-ray tube automatically
- The controller is easy to operate.

Features
1. Small volume, Light Weight, easy to take and simplicity of operation
2. Safe and reliable generator adopts design of SF6 gaseous insulator, grounded-anode, and fan forced cooling .
3. Controller adopts design of hardware with a wide operative range, having the advantage of long service and low failure rate.
4. Possess the reliable “Time –delayed” fiction, suitable to operate in the open field.
5. High degree of automation, with the fiction of trouble self shooting and indication.
6. Strictly followed with 1:1 working /resting radio , eliminating the disoperation.
7. The HV windings made by imported enamel wire are applied in the X-ray generator, so as to make the quality of the complete equipment improved a great deal.

Introduction & Application

Usable for inspection of rubber, wood, electronic components or polymeric products such as plastic, for detection of foreign bodies in food, and for fluorography of plants or animals. Use of high-sensitivity film makes it possible to inspect up to 6 mm iron thickness and up to 70 mm aluminum.

The low weight and compact size of these portable X-ray Flaw Detectors make them an ideal solution for field inspection. Due to high frequency switching technology, XXG-3005 produce an extremely stable X-ray output for very short exposure times. The control unit is microprocessor controlled.

KV, mA and exposure time can be adjusted by keyboard entry or by selecting one of the 100 exposure programs. All operational information is available on a 2-line LED display. Tube head warning lamp, pressure and temperature are all monitored to prevent operation in unsafe condition.

The control unit recognizes individual tube heads and automatically selects the required running-in programs. For operation monitoring, data of the latest 100 exposures are recorded and can be recalled on the display or downloaded to a printer.

The XXG-3005 is insensitive to power supply irregularities and has a low level of power consumption. The thin, light interconnection and power supply cables are equipped with shock resistant plugs. Along with the robust metal-ceramic X-ray tube, this leads to a very reliable, easy-to-handle portable X-ray Flaw Detect