Panoramic Flat Target X Ray Radiography NDT Inspection Equipment Small

Panoramic Flat Target X Ray Radiography NDT Inspection Equipment Small ?

Our Advantages:

Products Intoduction

◆?Adopt the newest energy conversion, and rose to high-frequency operation, which make energy conversion rate improved by 30% compared with the traditional equipment, break through the traditional 1:1 working mode, no rest time requirement.
◆ Low heat, continuous working does not affect the service life.
◆ 4000 turn all metal cooling fan make larger effective heat dissipation area; There will be no frequent over temperature protection during the full power continuous operation.
◆ Non flange design, small and beautiful apperance; End ring groove design make it easy to fix on the top of the pipe.
◆ Using high frequency paper film transformer, with strong heat resistance, low heat, High working efficiency and Low failure rate.

The controller has following features
◆ The control circuit board is configured with surface mount components under the control of digitized
microprocessor to avoid parameter adjustment and maintenance and ensure strong immunity.
◆ The loop is a modular structure under air duct type heat dissipation to ensure high reliability of
continuous operation;
◆ Time and kilovolt are adjusted by means of shuttle knob for fast, easy and reliable adjustment;
◆ Startup rate of variable-frequency control adapts to different generators and the voltage is configured
with soft startup and slow shutoff;
◆ It has enabled fully automatic training function, automatic voltage reduction upon discharge and
automatic time stepping;
◆ It has enabled circuit fault detection for heat dissipation fan of generator to ensure continuous heat
dissipation;
◆ The ratio of exposure time to operation time is strictly controlled at 1:1. The controller is immune to
the impact brought by power failure. Continuous operation time is adjustable from 0.1 to 30min;
◆ It is configured with waterproof and dustproof warning lamp socket to externally hold AC220V
exposure warning lamp;
◆ It is arranged with safety door signal interlocking terminal, which can be connected with lead door
control to protect personal safety;
◆ Delayed exposure is freely adjustable with the default maximum of 5min. Other delayed exposures
can be customized;
◆ The fan for heat dissipation of the controller can be easily and independently dismounted to remove
dust on regular basis and ensure long-term stability of the controller;
◆ The upper cover is internally locked to ensure convenience and reliability. After being opened, it can
be fixed and positioned at will;
◆?Rubber shock-absorbing angles are deployed around the box to ensure reliable field operations;
◆ Exposure time can be accumulated;
◆ Specific combinations of button enable to set parameters compatible with a plurality of units with?opening the cover;

Product Parameters
All series are configured with SF-05 controller;
Outer dimensions: 325×272×180 mm (excluding convex part of the handle)
Box weight: 9kg
Power input: AC120V-265V (the control system is compatible with full voltage and can meet
requirements of different generators for the lowest voltage)
Power: ≥ 3KW
Output voltage: DC80V-250V (Continuously adjustable for different generators)
Control mode: Adaptable to chopping variable frequency