Static Single Phase KWH Meter Enclosure DDS-2015-2

The following is the feature of the KWH meter enclosure

Overall Dimensions:  155*121*60

Terminal:

1)Terminals of 10-40A,15-60A,20-80A are available,and there are 2 pieces of signal terminals or on request.

2)RS485/RS232 interface can be integrated into the terminal block.

Meter Case: 

1)Pillars for register,PCB board,relay and transformer can be designed according to requirement of the clients.

2)Colour of the meter cases can be chosen

3)Specified structure can also be designed.

Material:

1)Bottom case and front case are made of ABS+PC.Screen of the front case is made of VO+PC.Terminal housing is made of bakelite or PC+fiberglass.

2)Colour of the meter cases can be chosen.

Elements:

1)front case,bottom case,back case,terminal

2)sealing screw, sealing washer

3)hook of the base

4)voltage connecting sheets&current connecting sheets

5) buttons,card door(if needed)

Components Related:

1)nameplate(if needed)

2)column sleeve

3)battery box(if needed)

4)foam box or bubble bag

Technical Parameter:

1)Ingress Protection:IP56

2)Reference Voltage:110V,120V,220V,230V,240V

3)Limited Working Temprature:-30 degree to +55 degree

4)Life Designed:25 years(assessed by China Electrical Power Equipment Testing Centre)

5) Management Certification:ISO9000/9001/9004/19011:2000

Origin:  China mainland

Packing:  foam box with carton package,bubble bag and environmental pulp with carton package

Minimum Quantity:  2,000sets