Tight Shaft Auto Tumble Shot Blasting Machine For Light Metal Castings

Tumble shot blasting machine for Light Metal Castings with rubber belt

Tumble?Shot Blasting Machine Description

Tumble?shot blasting machines are?equipped with a perforated rubber belt over which slide work pieces, while thoroughly cleaned. Version with a rubber belt is used to prevent breakage and other damage of sensitive work pieces. The abrasive flows through the holes in the belt into a collecting hopper and is poured into a storage bunker via the abrasive cleaner by means of an elevator. The newly developed abrasive separators ensure that the abrasive receives optimum cleaning and a high cleaning speed can be achieved. Innovative pressure washers provide optimum sand blasting work pieces and maintain a high productivity process.

Structure of Rubber Belt Shot Blasting Machine

Tumble?Shot Blasting Machine Advantage

1. Special thin and small workpieces can be also processed.

Shot blasting room with unique structure can clean and process the common casting and forging workpieces.Even very small and thin pieces can be handled without any damage.

2. Input and discharge simply and accurately.

For the smooth movement,the workpieces will not be hurted.It can be moderately and completely inputted and discharged, easy to be operated.

3. Simple maintenance

Simple structures of drum and the body can reduce damage to this machine,so that can save time and cost for maintenance.

Rubber Belt Shot Blasting Machine Operation

1. Add the shots?and load in the workpieces, then close the door.

2. Start the fan of the dust collector.

3. Start elevator, blasting wheel and shot supply valve in turn.?

4. After finishing cleaning process, stop shot supply valve, blasting wheel elevator and dust collector fan in turn.

5. After the machine stop completely, open the workpiece feeding door, unload the workpieces.

6. Emergency stop switch?is for emergency situation. The whole machine will stop immediately after pressing the button.

7. Dust collector should be stop timely after finish all the duty.

Range of Application

1. Desanding and decoring of iron, bronze and light metal castings

2. Descaling of forged metal parts, and heat treated components

3. Deburring of metallic and non-metallic parts

4. Forced but gentle turning and tumbling of the parts for all-round shot impingement

5. Targeted high performance shot blasting for specific applications

6. Continuous and thorough shot removal

Notice and Maintenence

1. Regularly cleaning the?collect box of the dust collector to protect the dust removing pipe from blacking.

2. Cleaning the bottom of the blasting room and the separator frequently.

3. Often?cleaning the shots around to avoid slipping?and falling.

4. Regularly check the rubber belt and belt of the elevator to avoid deviating.

5.?Never to open the workpiece feeding door unless the machine stop completely to avoid accident.

6. Frequently check the end plate of the blasting chamber and the wearable parts of the blasting wheel. To change the badly worn parts in time.

7. The machine must be lubricated periodical to guarantee flexible rotating.

8. regularly check and clean the drive section of the machine, change the badly worn parts.

Our service:

1. Reply your inquiry in 24 hours.

2. Experienced staffs answer all your questions in time.

3. Customized design is available.

4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.

5.?Special discount and protection of sales are provided to our distributor