Steel Hardware Nuts Bolts Threaded Insert Nut for Wood Zinc Plated Cylinder Shape

Steel Hardware Nuts Bolts Threaded Insert Nut for Wood Zinc Plated Cylinder Shape?

Steel insert nuts are headless and a through hole with machine threads for inside hole but self tapping threads that is suitable for machine threaded rod or shaft?, outside of inset nuts are self tapping threads for secure wooden pieces and stop insert nuts to be turned out or pulled out .

Pre-drill a hole in wooden material before insert nuts are inserted into material , and then screw in or hammer inset nuts .

Specifications

We provide a wide arrange of specifications for insert nuts from M2.5 to M30 and we are available for customized sizes .

Note

1 . All dimensions are millimeters

2 . Length can be adjusted .

Finishing

Inert nuts can be plated in different finishing according to requests of applications

? ? ? ● Zinc

The most popular plating for the most products , bright and smooth and resistant corrosion

The film thickness is 1～3μm , it improves brightness and wear resistance . it is for the most items .

Reduce roughness of parts and improve brightness . is workable for the most metal parts in industry .

With film thickness 0.13～1.27μm , tin finish with bright surface and good ductility ,corrosion resistance ,lower melting point ,eco-friendly features . and is used for electronics .

Usually, 5gm～8gm finish coating thickness and with good dispersibility ,Bright appearance .

Chrome finish is silver white color and the thickness of film is 0．25～0．5μm normally . chrome finish has many practical Features like Bright appearance ,Wear resistance ,Corrosion resistance ,Hard plating film ,Heat resistance .

Materials

Insert nuts are made of assorted materials for various applications in industry

1 . Carbon Steel

2 . Zinc alloy steel

3 . Plastic

4 . Brass

Installation

1 . Pre-drill a hole in wooden material .

2 . Put insert nuts into hole and driven by a wrench or hammer

Tips for installation

★ The hole diameter should be smaller slightly than outside diameter of insert nut .

★ Do not hammer insert nuts into material for nuts with inside hex socket , by wrench only .

★ Hole length should be suitable for length of insert nut .