Set Screw Low X054D162G54 Supplier

Additional Information

Name:Set screw low

Coding:X054D162G54

Specification:OD 10.5 mm x ID 0.4 mm x 11 mm L

Diameter: 0.40 mm

Compatible:Mitsubishi DWCXXX-F STD, Mitsubishi DWCXXX-F1 STD, Mitsubishi DWCXXX-G STD

Kenos model:M108

About KENOS

KENOS responsibility is to ensure that dealers have sufficient profit space, protect the interests of dealers and agents.Dongguan KENOS Hardware Technology Co., Ltd. is an enterprise specializing in manufacturing and wholesaling WEDM-LS commonly used products, including consumables and spare parts such as WEDM-LS filter,Set screw low X054D162G54, ion exchange resin, diamond Wire Guides, conductive block, insulating plate, water nozzle.

A day can be divided into before work, work, work in the maintenance:
1 before work:(1) check the buttons and switches, buttons, etc., the requirements of flexible and reliable, accurate location;(2) check the safety device, fastening device, the requirements of accurate, flexible, reliable, no loose;(3) check all kinds of instruments, the requirements of the correct, sensitive;(4) check the oil level, oil or grease lubrication chart according to the road, the amount of oil to meet the requirements;(5) the execution engine operation, each part should fully exercise and lubrication.
2 work:;(1) the implementation of operational procedures, to strictly abide by(2) at any time to listen, look, touch, smell, observe the operation of equipment, to timely treatment, without trouble running.
3 after work:(1) cleaning chip, wipe the appearance, the taper hole of the main shaft and the sliding surface, more than three days not to anoint rust, to strictly abide by.(2) each moving parts, buttons and switches in a reasonable position to strictly comply with;(3) cut off the power supply and air source, must be strictly observed;(4) clean up the environment around the machine tool, without obstacles.
Weekend
Weekend maintenance:Wipe all parts (including the operation of the panel, buttons, etc.), check the cleaning and filtering device, according to the slip table, while adding coolant to check whether the loosening of fasteners. Cleaning of spindle hole. Must be strictly abide by these.
Regular maintenance of the spark machine is equivalent to maintenan the wire edm wear parts, so that it can delay the use of the wire edm wear parts, so it is very important to understand the know ledge of the Wire EDM Wear Parts,.What's more ,if you want to know more of the Mitsubishi wire EDM parts knowledge could login KENOS official website .

kenosedm10

Dongguan KENOS Hardware Technology Co., Ltd.
Address:Hexing Road No.122, South Shatou District, Chang'an Town,Dongguan City, Guangdong Province,China(Mainland) [CN] IP:162.158.255.198
Hotline: