1500mAh CP305050 Lithium Primary Battery Cell Low Self Discharge Rate

Nominal Capacity	1500mAh
Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃
Nominal Voltage	3.0 V
Maximum Continuous Current	600mA
Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃
Maximum Pulse Discharge Current	1000mA
Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃
Storage Condition	Temperature ≤ 30℃ Humidity ≤ 75%RH
Operating Temperature	-40℃ to +60℃
Battery Dimension	See drawing on pag
Max Weight	13.0g
Self-discharge Rate	2%
Max self-discharged rate at ambient temperature 23±2℃
Shelf Life	10 years
Ambient temperature 23±2℃

1. Battery Characteristic

High Voltage

We provide the rated voltage is 3.0V

High Energy Density

The specific energy density of each battery is 346Wh/kg, more than 50% higher than steel shell lithium battery under the condition of the same weight

Wide Operating Temperature Range

We provide a wide operating temperature range, from -40℃ to +60℃

Long Shelf Life

Under the condition of normal temperature, the battery self -discharge rate of no more than 2% per year

Without voltage passivation, no activation necessary after long time storage, install-and-use immediately, free of maintenance

Fit for the modern light & handy electronic products

Overall dimensions can be customized according to different demands, short new product development cycle, fully meeting customers personalized needs

The best safety and reliability of lithium battery, in the case of without any protection measures to withstand short-circuit and piercing severe test, etc.

2. Main Applications

Telecommunications

Wireless telecommunication devices

Marine & signaling

Life jacket, signal light, buoy, etc.

Infrastructures

Automatic meters (water meter, electric meter, gas meter), conventional meters, etc.

3. Manufacturing Advantages

HCB Has nearly 9 years experience in Soft Pack Li-MnO2 Battery; Soft cell structure of Li-MnO2 Battery is researched and developed by HCB firstly in China; 60 models available, and customized with varies needs; More 3 million soft pack Li-MnO2 are sold to the customers each year by HCB; HCB has a lot of experience in both civil and industrial applications for Soft Pack Li-MnO2 Battery.

4. Company Advantages

Quality management system of HCB is conformity with GB/T19001-2008/ISO9001:2008 standard; GB/T24001-2004/ISO14001:2004 is HCB Environment Management System standard; The battery can pass drop test if you need; HCB can provide the report for safe transport of goods to the customers; CE test is available for HCB Battery; Rosh test is available for HCB Battery; The UL certificate can be given to you if required;

5. FAQS of General Safety Instructions

How to store the battery in your warehouse?

Storage environment should be as dry as possible.

When the abnormal heat release or leakage occurs, what should we do?

When the abnormal heat release or leakage occurs, the battery is not able to be continued to use.

What is the first step when you would like to use our battery?

The manual should be read before the battery is used.

What should you do if the children swallow the battery?

You need to keep battery out of the children. Please call to a physician immediately if it is swallowed by children.

If the positive and negative polarity of a battery is directly connected, what will happen?

If + and - polarity of battery is connected directly, it causes a short circuit and this may lead toxic gas and materials leakage or a big rupture.

If the batteries are soldered directly, what will happen?

The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.

Is it workable to charge the primary batteries?

If you charge the primary batteries, it can lead to toxic material or gas leakage and maybe cause big rupture or fire.