Home > Products > Vehicle Barrier Gate > High Speed 0.6s Barrier Gate Arm Parking Toll System Controller
High Speed 0.6s Barrier Gate Arm Parking Toll System Controller
- T/T L/C D/P D/A
- 7 days
You May Like
-
Straight Boom Vehicle Barrier Gate Automatic Traffic Barrier With Single Bar
-
180 Degree Folding Arm Car Parking Barriers With White Rubber To Protect Car
-
Security Barriers And Gates Vehicle Barrier Gate With 2.4G Rfid Long Rang Reader Handle
-
Intelligent Electronic Automatic Parking Barriers Fence Arm
-
OEM Automatic Gate Barrier Vehicle Barrier Gate For Parking System
-
OEM Folding / Fence Arm Parking Lot Barrier Gates Automatic Boom Barrier AC220V
Product Details
| Brand Name | WONSUN | Place of Origin | China | |
| Model Number | DZTP-133-A |
Product Description
Certification:CE, ISO, SGS
High Speed 0.6s Barrier Gate Arm Parking Toll System Controller
Product Features
1. Special driving structure, no gears, non-belt driving,maintenance free, high stability, longer life.
2. Special balancing structure design makes the barrier arm has the feature of slow-starting, fast-running, slow-stopping.3. It is running without arm-shaking.?
4. The brarrier arm is 90 degrees running which excluding the failure caused 360 degrees running.
5. Special low-speed aluminum housing motor integrated gearbox design, low noise, fast heat-dissipation.
6. The driving mechanism has the desiging of intelligent overheating protection system, in frequent use, it can control the warming of the motor, makes the motor not burned easily.
7. The main engine adopts mechanical limit switch and photoelectric limit switch dual protection, to avoid the problems caused by using traditional magnetic switch which is easily interfered by the external environment.
8. Barrier gae tcan be chosen from 1m to 6m.
Specifications
|
Model |
WST1211 |
|
Working Temperature |
-40℃～+75℃ |
|
Voltage |
220V±10%, 110V±10%, 50/60HZ |
|
Rated power |
80W |
|
Relative humidity |
≤90% |
|
Remote control distance |
≥30m |
|
Net weight |
48kgs |
|
Speed |
1S,1.8S,3S, 6S |
|
Max boom length |
6 meters |
|
Motor Rotational speed |
1400rmp |
|
Protection Degree |
IP44 |
1 pcs Gate Barrier
1 pcs arm boom (from 1m to 6m can customised)
1 pcs control panel(built inside)
2 pcs remote controllers
1 pcs manual book
Communication with customers
?
1)?????Q:?Connected power and press open/close button but traffic barrier gate no action?
|
A |
Reason |
Solution |
|
1 |
Fuse blown |
Check fuse and power in controller |
|
2 |
Battery?of remote control powered off |
Change a new one |
|
3 |
External protection circuit break or at protecting status |
Open the barrier door and click OPEN/CLOSE button on control box |
|
4 |
Same frequency interference |
Check photocell and loop detector |
?
2) Q:Connected power and press open/close button,traffic barrier gate will move but even when it is at right position, the motor still running and not stop?
?
|
A |
Reason |
Solution |
|
1 |
Limit switch |
Adjust the horizontal/vertical limit switch to correct position |
|
2 |
Main controller failure |
Change a new one |
?
3)???Q:?Motor running but traffic barrier gate arm no action?
?
|
A |
Reason |
Solution |
|
1 |
Barrier arm at 45° position where is hard to move |
Unlock clutch and manually rotate arm to horizontal or vertical position then try again |
|
2 |
Tension of balancing spring not suitable |
Adjust spring exactly |
|
3 |
Low working voltage |
Check the voltage and power |
?
4)??Q:?When opening/closing,traffic barrier gate arm cannot reach right position (90° vertical & 180° horizontal)?
?
