Smart Automatic Locking Boom Barrier Gate With Loop Detectoror Vehicle Sensors

Smart Automatic Locking Boom Barrier Gate With Loop Detectoror Vehicle Sensors

Vehicel loop detector
Torque motor,steady,low noise,5 million times
100% duty cycle,heavy duty
Fault auto-detect
Free maintenance

Intelligent barrier gate provides a secure and convenient solution of stopping unauthorized vehicle or giving access to authorized vehicle at highway,shopping center, exhibition center, hospitals, airports etc.

Description

1) This car park barrier provides open/close time: 0.6s / 1s?/ 1.8s?/ 4s / 6 sec. optional

2) Straight arm with rubber bar, Max.length following:

6m for 6 sec. & with anti-collision

6m for 4 sec. & with anti-collision

4.5m for 3 sec. & with?anti-collision

3m for 1.8 sec. & with anti-collision

3m for 1 sec.& with anti-collision

2.5 m for 0.6 sec?with anti-collision

3) Inclusive of arm and "push button" which opens/closes barrier

4) Exclusive of LED light bar,remoter, boom bracket and anti-collision mechanism: need to buy extrally

5) Optional housing color as yellow (default),orange, white, red and blue

6) Optional boom arm direction as leftward or rightward

1. Simple structure, easy installation & maintenanceTorque motor,steady,low noise,free maintenance

2. 2mm cold-rolled plate heavy duty case with IP54 protecion Anti-collision protects boom arm

3. Simple structure, easy installation & maintenance2 holes on the bottom of door for rain drain

Control via remoter,push button or PC

Intelligent Barrier Gate?Features

0.6 second fastestaction and 100% duty cycle operation with 5 million MTBF for toll gate

Free-maintenance torque motor ensures100% duty cycle operation with 5 million MTBF and 0.6 second fastest open/close time for toll gate and parking lots wth high traffic flow.

Easy installation and maintenance reduces your labor cost

Simple structure and no limit switch design ensures easy installation and maintenance which reduces your labor cost

Heavy-duty and simple-design housing

The housing adopts 2mm precise machining cold-rolled plate and static electricity sprayed anti-UV surface which is non-scale and unfading in 5 years, conformed to the IP54 dustproof and waterproof, Simple design also decorates your premises

System automatically self-checks operation status and reports errors

System always automatically self-checks operation status and reports errors shown on the LED tube of the controller.

Sine lever drive mechanism ensures smooth landing of boom without shaking

The patented precise casting Sine lever drive mechanism enables the boom arm moves from slow to fast when it starts, and fast to slow when it stops. This will effectively reduce the shaking of the boom arm and allay the burden of the electrical motor, so that the lifetime of the motor and mechanical components will be greatly prolonged.

Anti-collision protects boom arm (optional)

Anti-collision mechanism will protects the boom arm not to be damaged once boom arm was collided by a vehicle.

Safety--- Anti-hit by pressure resistance bounce

While moving down,arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is adjustable.

Safety--- Anti-hit by Loop Detector (Optional)

While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.

Safety--- Anti-hit by IR photocell (Optional)

While arm moving down, If infrared transportation between transmitter and receiver is blocked by human or vehicle, the arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.

Safety--- Anti-hit by “Opening Priority”

If a vehicle is coming while arm moving down, the arm will immediately go back to vertical position once a open command is given, which protect the vehicle not to be hit by arm.

Closing Priority

While arm moving up, the arm will immediately go down once a close command is given

Automatically close after the given time

Once this function is set “ON”, the barrier will automatically close after given time (1-90 seconds adjustable) if there is no vehicle passed after barrier open.

Automatically Close by loop detector (Optional)

If loop detector is installed, after vehicle passed the barrier will auto