Home > Products > Dewatering Filter Press > Coal Dewatering Recessed Filter Press For Tailings PLC Control
Coal Dewatering Recessed Filter Press For Tailings PLC Control
- 0 Piece / Pieces per Month
- T/T L/C D/P D/A
- 7 days
You May Like
-
Sludge Dewatering Filter Press Automatic Solid Liquid Separation
-
Manual Run Dewatering Filter Press , Plate and Frame Filter Press
-
Automatic Dewatering Filter Press , High Pressure Chamber Filter Press
-
High Efficiency Deep Cone Thickener Waste Water Clarification
-
Automatic Rake Lifting Slurry Thickener Flat Bottom Clarifier Hydraulic
-
Mineral Lime Softening Clarifier / High Rate Clarifier Thickener
Product Details
| Brand Name | INTEGRITY | Place of Origin | China | |
| Model Number | MT series |
Product Description
Certification:ISO9001:2008
Coal Dewatering Recessed Filter Press For Tailings PLC Control
?
Introduction of COAL chamber filter press
?
Chamber filter presses use filters to separate the liquid (filtrate) from the sludge and collect the solids (filter cake) in chambers. The slurry materials are sent to filter chamber by the pressure of feeding pump. Then filtrating media(filter cloth) separates solid and liquid in slurry material. When solid in slurry becomes cake shape, air is sent to diaphragm to fully squeeze the solid to reduce moisture content. If users have high requirements about filtration of sticky material and moisture content ratio, this machine has its own special characteristics to meet the needs.
?
It is available in manual, semi-automatic, and fully automatic units incorporating PLC control and automatic cake slagging system. You can easy to use our machine.
?
?
Features of recessed filter press:
?
Good sealing effect can perfectly avoid leakage.
?
It can reduce material waste and increase rate of recovery.
?
Specially apply to easy volatile, toxic, Irritating material or mining industry, or users who request good operating environment.
?
Shorter filtration, wash and cake cycles
?
Reduction of the residual moisture of the filter cake
?
Increased product throughput
?
Simple in operation, convenient in maintenance
?
Polypropylene plate for filter press
High intensity: It can endure high pressure.
?
Inodorous and Atoxic: No secondary pollution.
?
Good corrosion resistance: It can resist corrosion of acid and alkaline.
?
Heat resistance: It is able to bear about 70 centigrade.
?
The chamber are formed by combining polypropylene filter plates and frames, this creates chambers of 30mm, plate and frame type filter press are suitable for pre-coating filtration, which in the beverage industry is used for clear filtration.
?
?
Filter plate are made of strengthened PP & TEP through mold pressing, high in strength, light in weight, corrosion resisted, non-poisonous and odorless;
?
Simple in operation, convenient in maintenance, it adopts hydraulic pressing system, with manual plate shifting method, Air pressing or water pressing can be selected for squeezing filter plate with pressure 1.0~1.6 Mpa, this process is designed for reducing moisture content in cake and increase solid rate by 8%-35%.
?
?
| Working Principle | Sludge is separated in a solid and a liquid part with the help of a physical process such as filtration, squeezing, centrifugal separation or compaction. |
| Capacity/Adequacy | Usually applied in large scale and sophisticated wastewater treatmentplants. Not used on neighbourhood/ community level. |
| Performance | High |
| Costs | High |
| Self-help Compatibility | Low (rather high-tech). |
| O&M | Mechanical parts need periodical inspection. |
| Reliability | Technique does not work in case of power failure. |
| Main strength | Reduces volume of sludge and saves storage and transport costs. |
| Main weakness | This is an expensive high-tech solution for dewatering sludge. |
?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ??
?
??Technical Parameters of Hydrualic chamber filter press for coal tailings
