Ro4003 Pcb

Place of Origin	China

Rogers 4003C Double Sided PCB Laminate Manufacture ServiceProduct Description ? Base Material:Rogers 4003 PcbProduct Name:Rogers 4003 PCB BoardsLayers:4-LayerCopper Thickness:1ozBoard Thickness:Mechanical Drill: 8mil(0.2mm)Surface Finishing:Immersion gold 1U tkMin. Line Width:0.075mm(3mil)Min. Line Spacing:0.1mm(4mil)Min. Hole Size:0.1mm(4mil)Rogers PCB:Rogers 4003C pcbService:One Stop Turnkey ServiceSMT Efficiency:QFP.SOP.QFN.PLCC.CHIPTesting Service:Flying probe ,Test jig(fixture)Application:TelecommunicationsRogers 4003C knowledge: Volume production of microwave circuit assemblies requires fast, reliable and effi cient methods of attaching discrete microwave components to the circuit board. These could include simple two-lead devices such as resistors or diodes, or complex multi-lead MICs. Bonding techniques used for conventional epoxy glass grade laminates have been used with limited success on PTFE based laminates. However, conventional epoxy glass grade parameters are generally acceptable for the Rogers RO4000? series high frequency laminates. This application note is intended to present a general guide for device attachment to RT/duroid? and RO4000 high frequency laminates. RT/duroid Laminate Characteristics RT/duroid laminates are random glass fi ber reinforced PTFE or ceramic fi lled PTFE materials. PTFE is a soft, waxy, thermoplastic fl uoropolymer. The glass or ceramic reinforcement adds dimensional stability and increases the hardness but the laminates are, in general, much softer than the low frequency hardboards, such as glass/epoxy. PTFE is a thermoplastic rather than a thermosetting resin. At elevated temperatures the substrate will readily deform and take a permanent set. Lead attachment methods must therefore minimize the pressure applied to the dielectric, particularly at elevated temperatures.RO4000? High Frequency Laminate Characteristics RO4350B™ and RO4003C™ high freqeuncy laminates are glass reinforced hydrocarbon/ceramic materials. The laminate is a rigid, highly fi lled thermoset resin system which has a Tg >280°C (536°F). The high Tg helps to maintain the expansion characteristics over a wide range of temperatures. Lead attachment methods are similar to what is practiced with conventional FR4 epoxy grade laminates.Why do you choose XCEPCB? 1. We have 9 years experience professional rogers 4003 PCB manufacture. 2. Welcome your design, your logo can be printed in the PCB. 3. We offer MOQ and sampling service. 4. Our capacity can be 1000 square meter/square meters for rogers pcb laminate per month. 5. Sold makes types are according to your requirement (any color are available).OurVision Be the most reliable PCB and PCBA service supplier. Rogers 4003C pcb material in stock: Rogers4003C: thickness(0.254 0.508、0.813、1.524) DK 3.38 Rogers4350B: thickness(0.254 0.508、0.762、1.524) DK 3.5 Rogers5880: thickness(0.254 0.508、0.762) DK 2.2 Rogers3003: thickness(0.127,0.508、0.762、1.524) DK 3 Rogers3010: thickness(0.635) DK 10.2 Rogers3206: thickness(0.635) DK 10.2 Rogers3035: thickness(0.508) DK 3.5 Rogers6010: thickness(0.635,1.27) DK 10.2