Open Water Circulating System Cnc Spinning Machine , Induction Heater For Bearings

??? Open water circulating system for 250kw vacuum spinning machine

Specification:

This complete set of vacuum spinning machine is made up of melt-spinning chamber (including furnace body, inspection window, inert gas filling entrance, dust filter, imported metal molybdenum wheel, melt-spinning axle), sensor (including induction coil and 2 sets of crucible), cooling chamber, UPS, middle frequency power supply introduction mechanism which includes imported cooling water cable, melting crucible rotating mechanism, secondary feeding mechanism, water cooling system, middle frequency power supply, vacuum system, operation and control system.?

Description:

The qualified formula metal alloy ingot raw source under vacuum and inert atmosphere to melt, refine and spray, quick cool, primary crush, thus making the metal mini-type magnetic sheet for continuous vacuum spinning equipment.

Standard melting rate is 1.5kg/min, the max melting rate is 2.5kg/min.

General melting temperature is 1350 ℃ and the max melting temperature is 1500 ℃.

Melting system uses IGPS power supply and the melting power is more than 250KW, it takes about 40 minutes from power on to totally melt.

The secondary system can load 50kg ingot with diameter below 200mm.

Cooling chamber has vibration cooling function which can cool temperature from 700℃ to 60℃ within 2 minutes.

Applications:

The vacuum melt-spinning furnace is under the vacuum or non- vacuum conditions to smelt metals such as Fe-based alloy, Ni-based alloy. Under the non-vacuum state, pour the liquid metals on the surface of the high-speed rotating cooled roll, the rotating cooled roll throwing and hitting the metals into thin ribbon material.

Competitive Advantage:

Adopt middle frequency induction principal which is of quick heating speed, little burning loss, low labor strength as well as good quality.

Furnace body adopts optimum material which can enhance the use-life time.

Melting pot inspection window, thermal-preservation pot inspection window and nozzle inspection window provide a real-time and quick view on the furnace operation.

Adopt UPS for wheel quits in case of power failure.

Full leak detection system ensures safety during the whole process.

Adopt inert gas Argon or Nitrogen for gas protection to ensure the safety of the equipment as well as operators.

The melting crucible rotating mechanism adopts servo motor driven which quicken the rotating speed.

Detailed ?Image: