Hot sell rapid prototyping Makerbot 3D printer filament

Hot sell rapid prototyping Makerbot 3D printer filament

Products Specification:
Material: ABS PLA PVA Nylon plastic; conductive PP
Colors: more than 20 colors
Filament diameter: 3mm and 1.75mm
Packing: 1kg/ spool/ vacuum pack (with desiccant) /box, gross weight: 1.45kg,

ABS filament characteristics:
(1) ABS softer than PLA, but high strength, good toughness;
(2) density is small, when printing larger volume model lighter, save money;
(3) cost-effective, can be processed in wide range temperature;
(4) diameter variations + /-0.03mm,

PLA filament characteristics:
(1)No block nozzle, good stick hot bed, a smooth PLA used
(2)can be processed at 185 degrees
(3)low shrinkage, thermoforming dimensional stability
(4)Good toughness high strength, high stiffness
(5)No-toxic, odor harmless, good smell

Colors: Clear Natural white black red sky blue dark blue florescent green dark green florescent yellow dark yellow orange purple pink violet turquoise grey brown gold silver glow in dark,etc

Advantage:
1. We choose to have qualification certificate of the suppliers of raw materials, raw materials are non-toxic, stable quality. Prohibit the use of waste, recycling material.
2. ABS PLA be dry for enough time then mix colors, production line automatic laser detect kits control extuding rate, keep product quality.
3. Products through a variety of instruments detection quality, ensure the quality of qualified before shipment

Packing: 1kg/ spool/ vacuum sealed PP bags (with desiccant) /box, gross weight: 1.5kg, size: 20*20*10cm
12kg/carton-box, net weight:12kg, gross weight:17kg, size:43.5*43.5*30cm

each spool filament be seal PE bag with desiccant , then smaller carton, then out big carton-box
vacuum heated bag to replace of PE bag, make better avoid moisture.