double tooth roller crusher, mining machinery

First, an overview

Bi toothed roll crusher in compressive strength is less than 240Mpa, humidity, less than 35% of the hard and soft materials is suitable for crushing and crushing operations, such as coal, coke, petroleum coke, lime, silica, carbon, glass tube, asphalt or equivalent and above the hardness of solid materials, the machine have maintenance costs low, reliable performance, little dust, low noise characteristics.

Machine is equipped with two teeth and Bi toothed roll crusher, roller tooth surface points is large (small) wolf teeth, coke cutting, special gear, ring gear, straight tooth plate gear, and other applicable in the finished product size requirements of 10-300, requirements of powder, particles broken or coarse crushing occasions. For powder particles, less of the broken or crushed.

Such as mining industry crushing various ores, iron and steel industry and crushing limestone, coke; thermal power industry crushing coal; coking industry crushing coke; coal industry for coal crushing; chemical industry broken petroleum coke; electronic industry breaking silica; carbon industry crushing carbon block; solar industry crushing waste glass tube; the construction industry broken quicklime, construction waste, clay, asphalt, etc., or with the similar occasions.       

According to user requirements into the belt and the drive coupling (hard link) in two ways. The power of the equipment can be converted into a diesel engine or a gasoline engine according to the requirement of the user.

Two, the working principle of

Double teeth roll crusher is using two wear-resistant alloy roller, the relative rotation produced by high extrusion pressure crushing material, the material into the gap between two teeth and (V type crushing cavity after by two teeth and relative rotation of the squeeze pressure and shear force, in condition of grinding jiga, shear and mesh, material is crushed into the required size and then by conveying devices send.