Front Terminal 12V 150AH Rechargeable Lead Acid Battery Valve Regulated

Front Terminal 12V 150AH Rechargeable Lead Acid Battery Valve Regulated

Specifications:
?

?
?
CHARGE

?
?
STORAGE
● Batteries should be stored in dry and clean warehouse which has good air exchange system. Batteries should avoid direct sunlight. Batteries should not be near to heat (such as radiator, the distance should more than 1m). Batteries should avoid any toxic gas and organic solvent.
● When the ambient temperature is less than 25℃, the longest storage life is 6 months. If ambient temperature is higher, the longest storage life varies as specified in below chart.

?
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?
?
?
FEATURES:

● Designed life for floating charge is 10 years (20℃);

● Special polybasic alloys material of grid, strong

corrosion-resisting character, special formula of

lead paste, advanced plate curing technology,

long service life;

● AGM valve regulated sealing technology;

● Tight assembly technology ensures an excellent high-rate discharge performance;

● Wide temperature scope of application (-15~45℃);

● Best temperature of application (20±5℃);

● The shape is long and narrow, positive and

negative terminals are at the same side, it is very

convenient to install, monitor and maintain;

● Special protective cover for post, it is great to avoid

short circuit between positive and negative terminals;

● Special sealing technology of post and superior

sealing glue for post to make sure that there is no leaking on terminals;

● The acid filter and anti-explosion design can make sure the low

remitting of acid mist, ensure the safe and reliable application.
?
Applications:

● UPS & EPS System

● Telecommunication

● Banks & Financial Centre

● Hospital& Testing Laboratories

● Telecommunication

● Solar & Wind Energy System
?
?
TECHNICAL FEATURES:

? Sealed Construction

The unique construction and sealing techniques ensure no electrolyte leakage from case or terminals.

? Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high porosity, glass fiber material which in conjunction with plates, totally absorb and contain the electrolyte.

? Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and induces recombination of more than 99% of gases generated during float or cyclic usage.

? Maintenance Free Operation

There is no need to check specific gravity of the electrolyte or add water to batteries during float service life. In fact, there is no provision for this type of maintenance.

? Low Pressure Valve Regulated System..

All batteries are equipped with safety release valves, designed to operate between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery.

? Heavy Duty Grids

Heavy duty lead calcium tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications.

? Cyclic Service Life

More that 600 discharge/recharge cycles