Hydraulic Cylinder For Petroleum Machine

Place of Origin	China

Hydraulic Cylinder for Petroleum MachineProduct Processing and Inspection1.Cylinder TubeAccording to the work pressure,Website: ,work temperature,work situation and other special requirements, different cylinder tube will be choosed.1.1 Cylinder Tube:cold drawn precision seamless steel tube,hot rolled seamless steel tube, honed tube.1.2 Tube Material:SAE1020(20#) ,SAE1045(45#) ,16Mn(ST52),27SiMn,etc.1.3 Surface Roughness: R0.16-0.32μm1.4 Inside Chroming: If necessary,inside tube will be chromated.2.Piston Rod2.1 Rod Material: 35#,SAE1045(45#),35CrMo,42CrMo4,etc.2.1 Technical Treatment: Quenched and tempered.1.5-1mm,or 1.03mm per millimeter.3.Seal KitsAccording to customers' requirements and work condition, we will choose suitable seal kits, including: Hallite, NOK, SKF, Parker, Merker,Trelleborg, China made,Taiwan made.We will supply you suitable seal kits to ensure hydraulic cylinders a long lifetime,easy maintenance and simple repairing.4.Inspection and Testing4.1 We have professional quality control department,every step from raw material to finished product is in the same factory,each procedure will be tested by professional inspector.4.2 Before hydraulic cylinder is assembled ,every spare parts would be measured and cleaned.After hydraulic cylinder is assembled ,pressure test would be carried out one by one.We ensure the testing pressure is 30%-50% higher than rated pressure in almost one hour's test.Each hydraulic cylinder must be tested without any leakage.Raw MaterialsFinished ProductsPacking & ShippingAbout Us