S5PV210 board +4.3\

1GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
512MB DDR2 RAM and 1GB NAND Flash
LCD/Touch Screen, HDMI, Audio support
SDIO, USB Host/OTG support
Ethernet, WiFi, serial port, GPIO
Contains CPU board and motherboard
Linux 2.6.35 & Android 2.3 support (Android 4.0 will be supported; includes test demo)

CPU Module
1 GHz Samsung S5PV210 with PowerVR SGX540 graphics engine
512MB DDR2 RAM, 32-bit data bus, 200 MHz
SLC NAND Flash: 256MB/1GB
Two 60-pin and one 30-pin 2.0mm spaced DIP connectors for mounting to motherboard
51-pin 1.0mm spaced SMD connector for the LCD
HDMI interface
Four user LEDs (green)
Power LED (red)
Supply voltage from 2V to 6V
CPU module dimensions: 64 × 50 × 11 mm
Software: Android 4.0, Android 2.3, Linux 2.6.35, Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

Motherboard
Integrated 1 USB Host interface
Four serial ports, two of them converted to RS232 and lead through DB9 connectors (COM0, COM1); TTL level available through the CON1, 2, 3, 4 blocks
Eight user buttons
RJ45 Ethernet port using DM9000AEP, 10/100M adaptive
Audio input and output using the WM8960 professional audio chip (3.5mm audio output jack on board), containing Class D amplifier and on-board microphone; supports HDMI audio and video synchronization output
mini-USB Device port, USB 2.0 specification
Infra-Red receiver
Six ADC inputs; one connected to potentiometer, the others to CON6 block
Buzzer connected to PWM0
AT24C08 (256 Byte) EEPROM for I2C test
LCD interface, 40-pin 0.5mm-pitch chip block, supports 3.5" to 19" full-color TFT display LCDs
SDIO interface: used to connect an SD WiFi module, for example
CMOS Camera interface pins
RTC clock with a battery backup (battery may or may not be included depending on international mailing restrictions)
Two-layer PCB
Motherboard dimensions: 180 × 130 mm
Power supply: DC 5V through barrel connector or 4-pin connector block

Andrody System info
Linux&Android 2.3(will released Android 4.0 later)
Boot loader
 verison: Superboot-210
 Function: support boot and update system by TF-card(superboot)
Linux kernel
 verison: Linux-2.6.35
 Compile: arm-linux-gcc-4.5.1-v6-vfp
Android System
 Android 2.3(provide source code)
 Android 4.0(provide test demo)
Device Driver
 TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog, RTC,  keyboard
 WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver
File System support
 Ubi filesystem, yaffs, ext2/3,
Function use example
 Ethernet, Support DHCP, Audio in/out, SD WiFi support, HDMI support
 COMS Camera support, 3G support(WCDMA, CDMA2000)
 USB Disk support, USB Bluetooth support, Switch horizontal and vertical screen
 Dynamic Wallpapers

Linux System Info
Boot loader
 verison: Superboot-210
 Function: support boot and update system by TF-card(superboot)
Linux kernel
 verison: Linux-2.6.35
 Compile: arm-linux-gcc-4.5.1-v6-vfp
Device Driver
 TFT LCD/Touchscreen, HDMI, Audio OUT, MMC/SD card, NET, Serial port, watchdog, RTC,  keyboard
 WIFI, USB Host/Device, FIMC/JPEG/MFC/3D/2D, Camera, 3G driver
File System support
 Ubi filesystem, yaffs, ext2/3,
Graphics system
 Qtopia-2.2.0/Qt-4.4.3/Qt-4.7

more product info, please see our website:
/minidevs/Tiny210%20Board.html