ASTM A333 Gr 11 Seamless Alloy Steel Pipe For Low Temperature Service

Seamless?Alloy-Steel?Pipe?for?Low?Temperature?Service

ASTM?A333 Gr 11

Seamless?and?Welded?Steel?Pipe?for?Low-Temperature?Service

Abstract?

This?specification?covers?wall?seamless?and?welded?carbon?and?alloy?steel?pipe?intended?for?use?at?low

?temperatures.?The?pipe?shall?be?made?by?the?seamless?or?welding?process?with?the?addition?of?no?filler?metal?in

?the?welding?operation.?All?seamless?and?welded?pipes?shall?be?treated?to?control?their?microstructure.?Tensile

?tests,?impact?tests,?hydrostatic?tests,?and?nondestructive?electric?tests?shall?be?made?in?accordance?to?specified

?requirements.

This?abstract?is?a?brief?summary?of?the?referenced?standard.?It?is?informational?only?and?not?an?official?part?of?the

?standard;?the?full?text?of?the?standard?itself?must?be?referred?to?for?its?use?and?application.?ASTM?does?not?give?

any?warranty?express?or?implied?or?make?any?representation?that?the?contents?of?this?abstract?are?accurate,?

complete?or?up?to?date.

1.?Scope
1.1?This?specification?covers?nominal?(average)?wall?seamless?and?welded?carbon?and?alloy?steel?pipe?intended

?for?use?at?low?temperatures.?Several?grades?of?ferritic?steel?are?included?as?listed?in?Table?1.?Some?product?

sizes?may?not?be?available?under?this?specification?because?heavier?wall?thicknesses?have?an?adverse?affect?on

?low-temperature?impact?properties.

2.?1.2?Supplementary?Requirement?S1?of?an?optional?nature?is?provided.?This?shall?apply?only?when?specified

?by?the?purchaser.

1.3?The?values?stated?in?either?inch-pound?units?or?SI?units?are?to?be?regarded?separately?as?standard.?Within?

the?text,?the?SI?units?are?shown?in?brackets.?The?values?stated?in?each?system?are?not?exact?equivalents;

?therefore,?each?system?must?be?used?independently?of?the?other.?Combining?values?from?the?two?systems?may

?result?in?nonconformance?with?the?specification.?The?inch-pound?units?shall?apply?unless?the?\"M\"?designation?

of?this?specification?is?specified?in?the?order.

Note?1The?dimensionless?designator?NPS?(nominal?pipe?size)?has?been?substituted?in?this?standard?for?such

?traditional?terms?as?\"nominal?diameter,\"?\"size,\"?and?\"nominal?size.\"

ASTM?A333Seamless?and?Welded?Steel?Pipe?for?Low-Temperature?Service

?GRADE

Grade?1,?Grade?3,?Grade?4,?Grade?6,?Grade?7,?Grade?8,?Grade?9,?Grade?10,?Grade?11

CHEMICAL?COMPOSITION