Home > Products > Water Solenoid Valve > NC Brass BSP 1/8 Small Water Solenoid Valve for Gasoline / Diesel Fuel Oil
NC Brass BSP 1/8 Small Water Solenoid Valve for Gasoline / Diesel Fuel Oil
- T/T L/C D/P D/A
- 7 days
You May Like
-
Pilot Operated Solenoid Valve , Electro Hydraulic Directional Control Valves
-
Solenoid Operated Hydraulic Directional Valves With Emergency Control Lever
-
Direct Acting Water Solenoid Valve Normally Closed Stainless Steel 0 - 10 Bar Woking Pressure
-
Copper Water Electric Solenoid Valve , G1/4\" 24VDC Low Pressure Solenoid Valve
-
High Pressure Solenoid Hydraulic Directional Valves WSH01With NASI1639 Class 9 Oil Pollution Level
-
WSH02 WSH03 High Pressure Solenoid Directional Valves , Hydraulic Directional Valve
Product Details
Brand Name | GOGOATC | Place of Origin | China | |
Model Number | GMR |
Product Description
Certification:CE
GMR series Gasoline and diesel fuel oil small solenoid valve NC brass BSP 1/8
1. Specification
Pilot designed, low power, high pressure;
With IP65 coils, forged brass body;
Media:water,hot water,air,oil<20CST etc.;
Temperature:NBR:-5~80℃ EPDM:-10~130℃
VITON:-10~150℃
Pressure:0-10 bar
Model | Pipe | Orifice Diameter(mm) |
Principium | CV | Body material |
Seal | Work Pressure |
GMR-M02 | 1/8" | 1.5 | direct acting | 0.08 | Brass | NBR | 0-10bar |
GMR-M03 | 1/8" 1/4" | 2.5 | 0.23 | NBR | 0-7bar | ||
GMR-03 | M12*1.25 | 3 | 0.3 | NBR | 0-5bar |
Pattern: | Two-port two-position |
Principium: | direct acting type |
Control mode: | normally close |
Valve body: | brass |
Diaphragm material: | NBR: ≤80°C ,FKM≤150°C |
Working pressure: | 0~10bar |
Max pressure: | 10bar |
Voltage: | AC220V AC110V DC12V DC24V |
Medium: | Air ,water ,Liquid ,oil ect. |
Application: | Gas protection welder, various types of burners, test equipment small-flow air water control system |
2.Dimensions
Maintenance instructions:
1. attention to check the use of components, in the transport process is damaged, and then install the use of.
2. When installing, please note that the gas flow direction and the takeover are correct.
3. when using, please strictly comply with the technical requirements, such as the operating voltage, operating frequency, working pressure, the use of temperature, the whole machine debugging, it is recommended to use a manual device debugging, and then through power debugging.
4. Please pay attention to dust, it is recommended to install the exhaust port or muffler muffler throttle.
5. When connecting pipe, pay attention to only release the strap around the joint may not exceed the end face of the tooth, and pay attention to the elimination of pipe fittings, metal particles inside the pipe, dust and oil, etc
Contact Us
- GOGO Automatic Company Ltd.
- Contact nameMrs. Jen Qi Chat Now
- Phone86-574-88552150
- AddressNo.28,Nandu Road,Jiangkou Town, Yantai, Shandong
Product Categories
New Products
-
Casting Electro Hydraulic Valve , Hydraulic Directional High Pressure Solenoid Valve
-
Hand Operated Hydraulic Directional Valves 25mp Maximum Operating Pressure
-
Solenoid Operated Hydraulic Directional Valves With Emergency Manual Control Valve
-
G1/8\" - G11/2\" Solenoid Air Valve For Nitrogen / Oxygen / Carbon Dioxide Liquid Gas
-
UHP Check Valve Pilot Way Check Valve , Hydraulic Directional Valves
-
Auto 2 Way 2 Position Solenoid Valve With Timer , 24v Electric Solenoid Drain Valve
-
5 Way 2 Position Pneumatic Air Control Valve 1/4\" Port 1.2 Mpa Proof Pressure
-
Double Acting Valve Actuator Pneumatic Compact Air Cylinders 32 mm Bore 30 mm Stroke SDA32-30
-
Hydraulic Manual Directional Control Valve , Standard Directional Spool Valve
-
Industry Hydraulic Directional Valves With Lever Manul Operated DMG02 03 Model
-
110V AC Brass Air Gas Water Solenoid Valve Direct Drive Type G1/8\" - G2\" Port Size
-
5 Way Solenoid Air Valve For 40 Micron Filtered Air 1/2 Inch AC 220v Herion 2636000
-
High Temp Water Solenoid Valve With Pilot Piston Type G3/8\" - G2\" Port Size Stainless Steel Valve Bo
-
Electromagnetic Directional Type Charging Hydraulic Accumulators Nitrogen Charging Vehicle
-
Direct Operated Manual Hydraulic Directional Valves With Inductive Position Switches
-
0.5-100bar 2 Way SS304 1/2 Inch Water High Pressure Water Solenoid Valve 24V DC Stainless Steel
-
Manual Directional Valve With 35mpa Max Operating Pressure 450l/Min Max Flow
-
50 Bar High Pressure High Temperature Solenoid Valve 1/2 BSP Orifice 12mm NC 5404-04 Burkert Type
-
2 Way Plastic Mini Water Solenoid Valve For Water Purifier RO Machine 1/8\" BSP 12V DC Normally Close
-
Hydraulic Directional Proportional Solenoid Valve For Small Hydraulic System
-
Normally Close / Open Water Solenoid Valve With Stainless Steel / Brass Body Material
-
Electro Hydraulic Valve , Proportional Relief Valve With DIN43650 / ISO4400 / Plug Solenoid Electric
-
Solenoid Pilot Control Hydraulic Proportional Valve With Stainless Steel Material
-
ZDR 10 Series Modular Reducing Valves Pressure Relief Valve , Modular Controls Hydraulic Valves
Popular Searches
- extruder component
- screw barrel
- screw element
- rapid prototype
- prototyping
- 3d model
- titanium alloy
- metal prototype
- api coupling
- grease fitting
- iron machining
- stop service
- 3d printing service
- assembly service
- oil nozzle
- bakelite knob
- tool accessory
- grease nipple
- plastic auto part
- rapid prototyping
- final inspection service
- mechanical transmission part
- precision plastic machining
- drill bushing
- fastener part
- rubber piston
- other motorcycle part
- auto component
- other motorcycle accessory
- plastic prototype
Recommended Products
- KD400LYServo-integrated Medium-speed Wire-cut EDM Machine
- Cutter Wire Cutting in the Middle of the Kade
- Reliable Waterjet Cutting Machine for Stone Marble Porcleain Cutting Industry
- 20 Dual Spindle Precision 5 Axis Swiss Type CNC Lathe Machine for Metal-Cutting
- 325 36mm Spindle Bore Swiss Type CNC Lathe Machine for Sale
- Yuanjie CNC Swiss CNC Lathes With Tracer Magazine Barfeeders
- NEW 32 CNC Swiss-type Automatic Lathe
- Small Metal Lathe1120 Swiss-Type CNC Lathe With 3 Axes
- Small Precision Brand Swiss Type CNC Lathe
- 363 High Accuracy Small CNC Lathe Electric Spindle Swiss Type CNC Lath
- Swiss Type CNC Lathe Small Parts High Precision CNC Lathe Machine 164
- 12mm 5 Axis 7 Axis Swiss Type CNC Lathe Longitudinal CNC Lathe Sliding Head CNC Lathe Small CNC Machine
Find Similar Products By Category
- Manufacturing & Processing Machinery > Machine Tools > CNC Machine Tools
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Mrs. Jen Qi
Hi there! Welcome to my shop. Let me know if you have any questions.
Your message has exceeded the limit.

- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile