Automatic Glass Fiber Reinforced Winding Machine All - Sigital Control TUV

Brand Name	Ecorin		Place of Origin	China
Model Number	BL-GRP

Delivery Time:125 working days after prepaid money arrived
Certification:ISO TUV

Automatic Glass Fiber Reinforced Winding Machine All - Sigital Control TUV

China hot sales Industrial Control Computer Glass Fiber Reinforced Winding Machine

Ⅰ. Introduction

?This machine is used wingding Glass Fiber Reinforced Plastics on the tube. It features hige precision,high-productivity, low energy consumption and simple installation & controlling, easy to operate. the machine high popularity among the FRP industry.

This machien include three parts:

? ? 1. Main axle system.

The main axle is a constant torque motor, which is controlled by a frequency converter.

? ? 2. Winding cart.

The Winding cart uses AC servo motor to control the speed of its walking back and forth.

? ? 3. Control system

Adopts industrial control computer, through the parameters set, complete the whole process of automatic control.

Ⅱ. Technical parameters :

? ? 1.Main axle center height:1000 - 2000mm

? ? 2.Speed of main axle:6.25-62.5r/min

? ?3.Speed of winding cart:2.38-53.8m/min

? ?4.Work piece length:1-16M

? ?5.Work piece diameter:?50 - 2600mm

? ?ding angle :4o-90o

? ?7.Total Power:6-38KW

Ⅲ. Function features:

Adopts industrial control computer, all-sigital control, good expanding ability and entry All product parameters can be tuned or entered at will,simple & fast Fully automatic complete winding procedure Socket pipeline and various strengthening rings can be automatic wound Real-time tracking data show for operating trace & date Friendly human-computer interface,optional panel in both chinese and english Intelligent analysis if the failure,arbitrary winding on cut-off point Fiber carriage system adopts AC servo control to ensure more steady driving Automatic shut-down after process completed

Ⅳ. Winding rule and line pattern

Ring winding: The fiber wire gravitaxis along the main axle rotation direction according to certain requirements. Each rotation, move a yarn width, according to the circular, until the fiber wire is wrapped up. Intercross winding:The main axle clockwise motion,the fiber wire alternating motion along the main axle rotation direction according to certain requirements,so product surface to achieve cross winding,winding angle is 4o-90o.Then each fiber corresponds to a cut-off point on the circumference,engaged in the same direction without intersecting,different direction fiber will intersect.

Ⅴ.Equipment Operation

Put the winding cart, adjust the two parts in the same plane, connected by bolts. Fiber wire rack is arranged in the 1.5 meters away from the car track center. Main axle and the winding cart one meter apart, parallel to each other,fixed by bolts. Two of the roller on the same side of the main axle,distance according to the actual need to adjust Put glass fiber on the multilayer frame,through two fixed plate,reach the feed roller,through the corresponding wire groove,wrapped around the tube,pressed two lead screw. First,start the main axle, and then the winding cart. Adjust the appropriate speed ratio according with the data of the wire diameter, wire width and winding angle,etc.Then could to production.