T-1000S SD Card LED Controller

Place of Origin	China

Shenzhen Oxford Lighting Co.,Limited is one of the professional t-1000s sd card led controller manufacturers and suppliers in China,Website: , welcome to wholesale t-1000s sd card led controller made in China and check its price with our factory.1、T-1000S System features1、32—256 Gray level,Support software Gamma correction.2、Support the rules and special-shaped handle.3、Single-port output,can support 2048 pixels.4、Off-line(SD Card) control, play back content stored in the SD card.5、T-1000S store a maximum of 16 programs,copy multiple files to the SD card in order,after formatting the SD card as "FAT" format.6、The program must be named in orders . just as ：00_1.led, 01_1.led, 02_1.led.7、Compatible with single line or double line chips.NOTE：1. When T-1000S controller control less than 512 lamps the frame rate can reach 30fps. When T-1000S control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically.2. T-1000S must use the new software LedEdit 2012.2、Support chips：Chip typeSoftware code&Controller typeLamps/(MAX)NoteLPD6803,D705,1101,6909, 6912T-1000-68032048 pixelsLPD8806,LPD8809T-1000-88062048 pixelsTM1803,TM1804,TM1809,TM1812T-1000-TM2048 pixelsTM1804 and TM1809 are divided into high and lowTM1903,TM1904,TM1909,TM1912T-1000-TM192048 pixelsUCS6909,UCS6912,UCS7009,UCS5903T-1000-UCS-322048 pixelsUCS1903,UCS1909,UCS1912T-1000-UCS-2562048 pixels1903 and 1909 are divided into high and lowUCS3903T-1000-UCS-10242048 pixelsDMX512T-1000-DMX170/512 pixelsCompatible with standard DMX512WS2801,WS2803T-1000-WS2048 pixelsWS2811T-1000-WS28112048 pixelsWS2811 be divided into high and lowDS189T-1000-DS1892048 pixelsTLS3001,TLS3002,TLS3008T-1000-TLS* pixelsP9813T-1000-P98132048 pixelsSM16715T-1000-SM167152048 pixelsSM16715 be divided into high and lowSM16716T-1000-SM167162048 pixelsBS0901,BS0902T-1000-09012048 pixelsBS0815T-1000-08152048 pixels3、Definition of printing：ButtonsMeaningSETSave Settings （ to save current settings file and the playback speed ）.MODEChange programsSPEED+Speed upPress speed+ and speed- at the same time the program will play circularly.SPEED-Speed downDC5V+5V power inputGNDPower GND input7．5-24V+7.5-24V power inputPOWERPower indicatorERRORError indicatorSD卡SD CARDSD card slotTTL signal（245/spi signal）RS485 signal.CLKClock signalBSignal A / DMX+DATData signalASignal B / DMX-GNDSignal groundGNDSignal groundNOTE：For the TTL(SPI) signal, the controller signal ground must connect to the LED ground directly. ? ? ? ?4. Mode of connection1.Multiple T-1000S controllers can be cascaded together and work synchronously.2.T-1000S one TTL(SPI) signal and one RS485 signal port output,can control 2048 pixels/lamps；3.When the chip for LED is single line chip just with data, then just need to be connected with DAT and GND of the controller. If the chip for LED is double line chip with DAT and CLK, then need to be connected with DAT, CLK, and GND of the controller.4.If you need to use RS485 signal you need to connect controller A interface with LED lamps A (DMX+), controller B interface with LED lamps B(DMX-),?1.If you need to control a new IC type by the controller, software code mode is：T-1000-IC model.5. ?Special parametersMemory card：type：SD card（suggest using high-speed SD card）Capacity：128MB—2GBFormat：FATStore file：*.ledPhysical parameters：Working temperature ：-30℃—85℃Working voltage：DC5V / DC7.5-24VWorking power：1Wsize：L165mm×W80mm×H30mmweight：0.35KGsignal port：3pin connect port