500W Fiber Laser Cutting Machine HECF3015IT For Cutting Sheet Metal / Tube

500W Fiber Laser Cutting Machine HECF3015IT For Cutting Sheet Metal / Tube

Technical Parameter

Product Description

Components of Equipment

?1. Laser

? ? IPG-500W Fiber Laser

(1)Laser output power 500W

(2)Laser wavelength 1070nm

(3)Output energy modulating 10%-100%

(4)Input Power <2KW

(5)Working Temperature 15-35oC

?2. Fiber-optical Laser Cutting Head

The Laser cutting head adopts German technology, equipped with QBH fiber output connector, special optical lens, sealed accurate focus adjusting method, and fast electric capacity transducer with minimum cutting gap 0.2mm, which could increase cutting speed and reduce gas consumption.

3. Machine tool

The machine adopts gantry structure with high rigidity, double servo motor drivers and gear rack transfer system, which has high accuracy and is capable of withstanding high speed and acceleration. The worktable is composed of steel saw, pneumatic rollers and clamps. The rollers facilitate loading sheet metal, while the clamps could fix the sheet metal and guarantee the cutting accuracy. The movable tray under the machine tool could collect the scraps and small product during cutting process. The U and V axis applies four jaw chucks and rotate simultaneously. The centrosymmetry tube of the long axis within 100mm could be cut effectively and perfectly after adjusting the position of chuck.

4. Control System

CNC control system includes laser cutting process, normal stock layout function and laser processing control. It mainly has drawing process, parameters setting, user-defined cutting process edit, stock layout, route planning and cutting control. The cutting power could be adjusted with the cutting speed. The individual pull in and pull out speed could be set. It also has material process library, which could save all the process parameters for the same material.

5. Red light indicating system

The coaxial red light is used as the indicator to make it simple to adjust optical system and more accurate to position working point.

6. Cooling System

The water cooling system is equipped and the temperature could be indicated. The water cooling system would start working automatically when the temperature reaches higher than the preset value and stop working automatically when the temperature is below the preset value.

7. Air dryer

The air dryer with unique designed pipe system, high efficiency heat exchanger, cooling evaporator and gas-liquid segregator could remove the moisture, oil drop as well as solid particle to make the cu