Metal Racking For 4S Store

Racking for Automotive Fittings is suit for high warehouse, light cargo, pick by man and large storage quantity situation, which can increase the using space. Racking for Automotive Fittings systems were widely used in automobile and logistics industries.

Racking for Automotive Fittings could be the first with shelves and second platform, or both with shelves. The shelves in first layer not only for storing goods, but also for supporting the second layer. Can be design many layers(usually 2-3 layers), and with staircases handrails, elevator and lighting systems. If the bottom beam distance can make short, the whole system cost can low down a lot too.

Racking for Automotive Fittings usually takes the panel shelf or heavy shelf as the principal part and support the floor decking. Floor decking is made by cold rolling steel, checkered iron, or steel grating. Cold rolling steel has strong load capacity, good integrity, good load capacity, high precision, surfacing and so on. Many choices and easy equip lamp system, and easy to store, pick, management. load capacity is about 500kg/level and distance of each floor is 2.2 to 2.7 meters, and the top one is about 2 meters. It is convenience for both manual and machine operate. 

The main parts: frame (main support of the multi-tier shelf), main joist (normal shape, connect with frame), subordination joist (crisscross with main joist, connect floor decking), floor decking (floor panel), stair case, guide rail barrier and other connecting parts.