High Performance Aluminum Laser Cutting Machine , Laser Metal Cutter Machine

High Performance Aluminum Laser Cutting Machine , Laser Metal Cutter Machine

Guidelines for using Laser Cutting Machine (Laser Cutter).

Laser cutting machine shows "beyond limit data error"
Laser cutting machine stops working while the panel display shows "beyond limit data error"?
1, ?Check whether the machine is well connecting with the computer.
2, ?Open the cutting software - > click "file" menu - > communication Settings change the sending and receiving buffer time to 5 or 10.
3, ?Replace the cable or the mainboard.

While pressing the same direction pane, laser cutting machine shows forward or inversion and electric motor can't lock?
1, ?Cut off all the power and clean the high pressure head with cotton cloth softly.
2, ?Cut the broken water pipes and reconnected to laser tube. Band them together.
3, ?Reconect the high tension line.( there are 7 silver thread for high tension line, any of them is necessary)
4, ?Dry the high pressure head with fan, restarting up after thirty minutes.

Technical Parameter

Applications

For cutting sheet metal, especially good for processing copper, aluminium with high reflection?and?tungsten, molybdenum with high hardness.

Auxiliary Equipment and Function for Laser Cutting Machine

Protecting Laser Cutting Machine for a long term's operation.

Standard Equipment

1. Water-cooling Machine

Standard water-cooling machine with small power, low consumption and high performance. Small power water-cooling machine will be effective due to the excellent performance of sheet metal fiber laser cutter and the high photoelectricity conversion efficiency.

2.?Centrifugal Blower

Low-noise centuifugal blower could reduce metal dust pollution caused by metal processing, to protect the employee's from get harmed.

Optional Equipment

1.?Air dryer, Filtering Storage Tank

Regrigerated compressed air dryer and filtering storage tank can remove water and most impurties in the air, which is the best post treatment equipment for air compressor. It can stablize the pressure of compressed air and make sure the best cutting effect.

2. Air Compressor

Optional air compressor blow and compress air during the cutting process, which can greatly reduce the using cost.

3. Special Cutting Parts for Pipe Materials

Equip with the special gripper for cutting pipe, which can drill with intersecting line and cut off the cylindrical metal pipe, and the pipe cutting diameter area is from 20mm to 250mm, which is good for broadering the utilization ratio of equipment.

Before you sending us inquiries, please let us?know your requirements as below:

What's the materials you plan to?cut? ??The thickness of the materials? ? ?What's the size of the materials? ??What is the final products?? ? Are you end user or machine distributor?

Our Service

Pls feel free?to contact us to get more informations! ?