100W IP67 Round Driver

Place of Origin	China

If you are planning to buy high-quality CE certification 100W ip67 round driver at low price from one of the professional China led round shape driver,Website: , meanwell hbg driver, waterproof round driver, 100w meanwell round driver, ufo round size driver manufacturers, please feel free to contact Zhihe Xingye Electronics Co.,Ltd. 100W 36V ?Constant Voltage LED Driver ZH-HBG-100 Waterproof IP67 Round Shape SMPS Features: Universal AC input / Full range (up to 305VAC) Built-in active PFC function Protections: Short circuit /Over current /Over voltage /Over temperature OCP point adjustable through Output Cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Suitable for dry / damp / wet locations 3 years warranty, Tc70℃ 40000hrs Model Series: ZH-HBG-100-24() / HBG-100-36() / HBG-100-48() /HBG-100-60()? Blank :?IP67 rated. Cable for I/O connection. A :?IP65 rated. Output constant current level can be adjusted through internal potentiometer. B :?IP67 rated. output constant current lever can be adjusted through output cable with 1-10V,PWM signal and Resistance? E(option) :?IP67 rated. Can be fixed by steel support. Detailes: Model HBG-100H-24 HBG-100H-30 HBG-100H-36 HBG-100H-42 HBG-100H-48 HBG-100H-54 Non-standard type Output DC voltage 24V 30V 36V 42V 48V 54V 55-220V Rated current 4.0A 3.35A 3A 2.2A 2.1A 1.9A 0.5-2.4A Rated power 100W 100.5W 108W 92.4W 108W 102.6W 100W Ripple&Noise 150mVp-p 150mVp-p 200mVp-p 200mVp-p 200mVp-p 200mVp-p MAX 500mVp-p Output voltage 18-24V 20-30V 26-36V 30-42V 36-48V 42-54V Customized Output current Can be adjusted by internal potentiometer（Only A） 2-4A 1.2-2.5A 1-3.1 A 1-2.4A 1-2.2A 1-2 A Customized Voltage tolerance 1% 1% 1% 1% 1% 1% 1% Line Regulation 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% 1% Load Regulation 0.50% 0.50% 0.50% 0.50% 0.50% 0.50% 1% Starting Time 2500ms,50ms（@full load）230VAC/115AC; B model：2500ms,200ms（@full load）230VAC/115AC; Hold-up Time（Typ） 10ms@full load ?230VAC/115VAC Input Input voltage 100-277VAC OR 130-420VDC Frequency range 47-63HZ Power Factor（Typ） PF>0.98 115VAC, PF>95 230VAC, PF>0.93VAC 277VAC @full load Efficiency（Typ） >88% >88% >89% >89% >90% >90% >90% AC current（Typ） 1.4A/115VAC, ? ?0.6A/230VAC , ? 0.55A/277VAC Input inrush current（Typ） (cold start)<50A /230VAC Leakage Current <0.75MA/277VAC Protection Output Over-current protection OCP point95-105% When the output current is over,Return to normal status when output limit current to get right. Short Circuit Protection The input power shall decrease when the output rail short,the power supply shall no damage,and shall be self-recovery when the fault condition is removed Over ?Voltage 28-34V 34-40V 42-50V 48-56V 54-64V 60-67V Customized When the output voltage is over, the products is protected such as hiccup or when it is at the highest point of output voltage the product would not be hurt when the fault is excluded or is start working again. Over Temperature 85℃±10℃,start 85℃ automatic recovery,Derating Mode .When temp reach 95℃,The Max current will decline 40% Environment Operating Temperature -40---+70℃ Relative operation Humidity 20-95%RH Relative Storage Humidity -40-+80℃,10-95%RH Max temperature Rise +30℃ ? ?Without wind open environment, the highest temperature of the shell. Vibration 10-500HZ,5G 12minutes per cycle for each axis(X,Y,Z) Safety Standards&EMC Safety Standards EN 61347-1：2008+A1：2011+A2：2013 , ? EN 61347-2-13：2006 ?, EN 62493：2010 Dielectric Strength(Hi-pot) I/P-O/P:3.75KVAC ? ? ?I/P-FG:2KVAC ? ? O/P-FG:0.5KVAC Insulation Resistance I/P-O/P, I/P-FG, O/P-FG: ?100M Ohms/500VDC/25℃/70%RH EMC Emission EN55015,EN55022(CISPR22),Class B,EN61000-3-2 ：2006+AA:2009 (≥70%@ full load) EMC immunity EN55024-A , ? EN61000-3-3：2013 Others MTBF ≥150Khrs ?MIL-HDBK-218F(25℃) Size 130mm*66.5mm Package carton Note All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using? a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance: includes set up tolerance, line regulation and load regulation. 4.Constant current operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design. 5.Derating may be needed under low input voltages. Please check the static characteristics for more details. 6. Length of set up time is measured at cold first start.? Turing ON/OFF power supply may lead to increase of the set up time. 7.The power supply is considered as a component that will be? operated in combination with final equipment.Since EMC performance will be? affected by the complete installation,the final equipment manufacturers? must re-quality EMC Directive on the complete installation again. 8.To fulfill requirements of the latest ErP regulation for lighting fixtures,? this LED power supply can only be used behind a switch without permanently. Size:(mm) Blank:(ZH-HBG-100H) Certifications Package