SOLAS Apporval Life Raft Light Led Indication & Illuminating Light For Liferaft

SOLAS Apporval Life Raft Light Led Indication & Illuminating Light For Liferaft

Decription:

The external light and internal light are connected with battery body by two individual wire-connectors. The battery powers both of internal and external lights. When the liferaft is inflated, the battery can be automatically activated by pulling out “O” ring and both of lights are activated at the same time. The external light is a high intensity 4.3cd?flashing light for mounting externally on liferaft to signal for rescue. The internal light is an adequate steady light for reading inside a covered liferaft. The?three units are sealed and watertight.?

Product Standard

according to the new standards amended in 1996,and all of their properties are complied with the standards of the “safety of life at sea”(SOLAS)? (1974) amended in 1996.

Installation
1,?The battery into the battery bonding column in Punta bag;
2,?Showing the position lamps installed in the raft outside the Punta column to the top;
3, Within a lighting installed in the raft or the vertical column column Peng Fang
4, Pull the switch or the Department of the Peng-chu, and the life raft floating tire rope at the bottom
of the appropriate column.
5, lithium battery shell particles of imported ABS material die casting has good oil and anticorrosion,
rubber die casting lamp part is, there is a good waterproof shockproof effect.
6, the power part of the adoption of good performance of the lithium battery ER34615, can be -30 ℃
+65 ℃ environment in the normal discharge
7, The Ministry of imported lamp light-emitting LED chip, LED and driver circuit board and the
regulator circuit board, so that can play a good battery utilization, can extend the battery life and light
effects (light-emitting frequency of 50-70 times per minute)

Main Technical Specifications

Feature:

Products photos