NTG-24-30 battery charger 220V/24V 30A 800W AUTO CHARGER

NTG-24-30 battery charger 220V/24V  30A 800W AUTO CHARGER 

A, the basic technical parameters

The input voltage: AC 220 V rechargeable battery voltage: DC 24 V

Output current: 30 A DC output voltage: 30 v

Second, the basic working principle:

Advanced constant current, constant voltage, floating a three-stage charging and three phase constant current mode, charging curve with CPU control pulse width modulation (PWM) technology, precise control of charger charging current and output voltage, ensure that the battery don't owe filling, and effectively guarantee the battery charge.

Three, protection function:

(1), overload protection: overload charger automatically shut off;

(2), reverse connect protection: when the battery reverse connect, charger without output;

Four, charging machine instructions:

(1), the indicator light LED1: red, the power indicator

(2), the indicator light LED2: red, charging indicator

(3), the indicator light LED2: green, full of instructions

(4), digital table: select switch up, showed that the charging voltage

Selector switch play down, showed that the charging current

Five, the operation method:

1, check whether the ac voltage level is consistent, check if there's any loose for the charger plug falls off phenomenon.

2, please put the charger to the battery when charging charging interface, connect the charger power plug to the power again.

3, after open damper on the power switch, the red light is lit, the normal charge, when the green light is lit, said the battery has been charged.

4, according to different depth of battery discharge, usually 3-10 hours of battery is full.The battery

After full of, first unplug the power plug, unplug chargers output plug again.