Sell Separating and Cutting Machine

Place of Origin	China

Model No.:FQL-1300III
Product Origin:China
Brand Name:
Price Terms:
Payment Terms:
Certification:
Description:Major technical specifications: 1) Applicable materials: BOPP, PET, CPE and PVC 2) Max. feeding diameter: φ600mm, and max. width of feeding materials: 420mm 3) Slitting width: 80~1,300mm 4) The upper and lower shafts for cutting materials are detachable 5) Mechanical speed: 0~160m/m 6) Limit tolerance of rolling surface: ≤±1mm 7) Total power: about 5kW, and power voltage: 380V±10% Major configuration: 1) This is the horizontal separating and cutting machine, and the rolling and rolling-up lie on the same side 2) The main shaft drive adopts the synchronic wheel and belt (top brand in China) 3) Upper rolling tensile strength is 5kg magnetic powder clutch; lower rolling tensile strength is 5kg magnetic powder clutch 4) Rolling-up tensile strength is 10kg magnetic powder clutch, cooled by water 5) The cutter is manually adjusted, equipped with 12 flat knives, and RMB is charged for round knives; (10 round knife stands) 6) The main shaft roller pneumatic control, and the drive roller guide uses the dynamic balance jump treatment 7) Two upper and lower rolling-up pneumatic core shafts 8) The power of the waste end blowing machine is 0.75kW (China top brand) 9) 4 pressing rollers (rubber roller) 10) Two sets of spring regulated ball bearing slipping shafts. (RMB1,500 is charged for pneumatic control) 11) The feeding determines the length and position automatically 12) One set of rolling-up prick steel pipe shaft Control part: 1) The general control is equipped with independent control box 2) The main motor is equipped with one set of 4kW splitting motor 3) The deviation is rectified by the switch, and the photo-electricity is Taiwan Futai KS-C2G 4) The deviation is controlled by ball bearing pole and TDY90 motor 5) The rolling and rolling-up are controlled by tensile strength potentiometer, subject to free adjustment (manual control) 6) The whole machine adopts the imported KTM-DT30S programmable controller (PLC) 7) It is equipped with wiring diagram and operation manual 8) Size: 2,500 x 1,800 x 1,500mm and weight: 3,000kg