PDH MUX Fiber Optical Multiplexer,fiber to 8 E1:PDH-8

sales@fastfom.com
PDH MUX Fiber Optical Multiplexer,fiber to 8 E1:PDH-8
cenny.xu[at]

Description
 
8 E1 PDH Fiber Optic Multiplexer
 
Introduce
 

PDH-8 Optical multiplexer is a low cost and high performance optical line transmission equipment, which combines four ITU-T G.703 compliant standard electrical E1, 2.048Mbps signals into an optical data stream for transport over fiber optic cables. Several transmitter options for different cable types and wave-lengths are available. This optical line equipment is developed for transmission in access networks, corporate networks, dedicated networks for railway and power companies etc.

Features
 

Advanced and compact design that performs E1 multiplexing & de-multiplexing and provides a 100Mbit/s optical interface in a single unit.
Built-in AC/DC or DC/DC converter and supervisory microprocessor
Digital clock data recovery for E1 signal
Provides visible and audible alarm indication
Low power consumption
Order wire channel for end to end installation and maintenance
Auxilary data channel in optical line code
Centralized network management with the Topone NMS
High reliability
Flexible installation in various mechanical constructions.
Local and remote loop back test for diagnostics

Technical Specification

Electrical (E1 interface)
Channel capacity:8 channels
Bit rate:2.048Mbps50ppm
Line code:HDB3
Nominal impedance:75ohm unbalanced / 120ohm balanced
Jitter character:ITU-T G.742,G.823 compliant

Optical

Bit rate:100Mbit/s
Line code:1B1H
Optical source:LD
Transmitter power:>=-9dBm
Receiver Type:PINFET
Receiver sensitivity:<=-40dBm(BER<=10-11)
Wavelength:1310 / 1550nm
Optical connector:FC/SC
 
Power supply

Power input:AC/DC optional
Power consumption:<=10W

Environment

Temperature:-5degree~+40degree for operation
            -20degree~+60degree for storage & transport
Humidity:10%~90% RH non-condensing

Physical

Standalone compact (19"/2)
Dimension:220mm(width) 3.5mm(height) 50mm(depth)
Weight:1.0 kg
Rack type:EIA 19"
Standalone (19")
Dimension:
 440mm(width)*3.5mm(height)*50mm(depth)
Weight:1.2 kg

Rack Type:EIA 19"
Rack Mount(19")
Dimension:483mm(width)*66mm(height)*25mm(depth)
Weight:12 kg(full deploy)
Rack Type:EIA 19"