50HZ Wet Sandblasting Equipment Dust free Sandblaster 0.3 - 0.7MPa Air Pressure

50HZ Wet Sandblasting Equipment Dust free Sandblaster 0.3 - 0.7MPa Air Pressure

Specifications:

Description:

1. The machine made of glass fiber reinforced plastics is durable and resistant to corrosion;

2. It is equipped with a new uncharged airbag switch to control sand pump and compressed air simply, safely and reliably;

3. The sand pump is designed reasonably to easily start and provide a long service life;

4. It is suggested to use fine glass beads and various fine emery powders.

Applications:

This equipment is use the grinding pump and compressed air as the drive power ,with the grinding as media ,ejection of the work-piece machining device . It has the following functions .

1, Clean up the heat treatment, welding parts, castings, forgings, oxide scale, residual salt and slag, cleaning quality can be achieved Sa3.0 level.

2, Cleaning machine parts micro burrs, surface residues and so on.

3, Reducing roughness Ra value.

4, It can be used as surface-coating, pre-treatment prior to the plating process, the active surface obtained, improving coating, coating adhesion.

5, It can be used for other processing methods difficult to complete high accuracy, small roughness Ra value, light decoration processing complex shape parts.

6, t can be used to improve the physical and mechanical properties of the surface, such as changes in surface stress, improve lubrication conditions with even pieces.

7, During exercise reduce couples noise..

Competitive Advantage:

1. High coverage

2. Consumption of blasting media reduced by 60% and ery low consumption of water

3. Long service life of all parts subject to wear

4.Dry blasting media not required (saves storage costs)

5. Multiple use of blasting media is possible

6. Rust inhibitor injection available

7. Adjustment possibilities for every job.