15 T Main Frequency Melting Holding Furnace / Aluminium Scrap Melting Furnace

15 T Main Frequency Capacity Induction Channel Melting Holding Furnace For Copper
?

Application

1. It is used for melting non-ferrous metal, ferrous metal and nonmetallic part. Our?factory produce smelting furnace and vacuum smelting furnace.
2. The melting furnaces mainly used for smelting steel, iron, copper, stainless steel,?aluminum, gold, silver, precious stones, metallic and non-metal;
3. The vacuum melting furnaces is mainly used for smelting heated metal or non-metal under?the environment of protecting atmosphere or vacuum (such as cobalt, tungsten, titanium,?etc)

Specification-Material Aluminum
?

Features
?
1.Using a zero-voltage scanning soft-start mode, in any case may at any time to start or?stop, will not have impact on power supply.
2. Fast smelting with low production cost; low-pollution and environment-friendly ;
3. A direct effect from the cold furnace melting. Dissolved material will be fully dumped?clean. Molten material easy to replace.
4. Power adjustment flexibility. Be able to continuously smooth adjustment. Temperature?uniformity can be easily controlled. Oxidation burning less. Metal components evenly.
5. Furnace shell using cast aluminum or steel structure, small footprint; furnace flip dump?convenience, according to the need to use electric, manual, hydraulic tilting furnace and?other means.
6. Designed to automatically adjust angle of inverter circuit that can automatically adjust?the load impedance match, without adjustment of capacitance compensation and always run the?equipment in good working condition; power supply system diagnostic error function, easy?maintenance.

Supply package range

Furnace body ,hydraulic tilting device
Water cooling cable
Main frequency power supply
Capacitor cabinet
Low voltage power control cabinet
Water temperature and water pressure alarm
Furnace leak alarm
Spare parts of equipment

Installation

1. Under the following conditions are satisfied, the seller’s installation and?construction team will start equipment installation and commissioning for a period of four?weeks.
2. Infrastructure installation, civil construction, maintenance have been completed, and?meet the installation requirements.
3. The cooling water pipes are connected in place. Pressure and flow meets the seller’s?demand;?
4. The lifting equipments are placed to cope with the construction in the suitable?condition; ?