GK1561-1AA00 (CP5611 for S7-200,S7-300,S7-400)

Description:
CP5611 communication card is optoelectronic isolated design for industrial applications.There is anti-lightning & anti-surging protection circuit and over-current protection on the RS485 port.The adoption of industrial chip applies to a wide temperature range. CP5611 card  is used to achieve the PROFIBUS DP / MPI / PPI communication between PC or PG and the SIMATIC network.

Communication services: 
PROFIBUS-DP master grade 1 and 2 
PROFIBUS-DP slave and SOFTNET-DP slave 
MPI/PPI communication
PG/OP communication 
S7 communication with SOFTNET-S7

S5-compatible communication (SEND/RECEIVE based on the FDL interface) with SOFTNET-DP or SOFTNET-S7

CP5611 applies to the following software:
STEP7 V.52 and above 
SOFTNET-S7 
SOFTNET-DP 
SOFTNET-DP slave 
COM PROFIVUS V3.3 and above 
STEP 7-Micro/WIN V3.1 and above 
ProTool, ProToo/Pro 
NCMPC

Technical specifications: 
Transmission rate:9.6Kbps~12Mbps, corresponding maximum communication distance conforms to PROFIBUS standard

Interface: PROFIBUS/MPI/PPI, isolated 9-pin Sub-D socket

Isolation Voltage: 1000VDC

RS485 port with anti-lightning and anti-surging protector, repeatability surge capacity: Ipp = 100A (10/700us, 4KV)

Standard: ITU-TK20/21, VDE 0433. ± 15KV ESD (ESD) protection

Over-current protection: RS485 interface can withstand up to 60V voltage caused by the sustained over-current

PG/PC connection: PCI2.1 standard slot

Standard voltage: +5 VDC

Power: 2.0W

Operating temperature: 0 ~ + 70 ℃ 

Size (width × high) (mm): 102 × 130