SGS Approved Inorganic Polymer Flocculant Wastewater Purifying Chemicals

SGS approved Polyaluminium Chloride PAC-02 yellow powder for potable water treatment

PAC-02 Polyaluminium Chloride is used for drinking water and wastewater treatment.
?

PAC Product introduction:

This product is a kind of inorganic polymer flocculant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridges, sediment trap etc mechanism function, make edema subtle aerosols and colloidal ions off firm, gathered, flocculation, coagulation, precipitation to purify the treatment effect.

Polyaluminium chloride Features:
1) Spray dryer type
2) Used for drinking water treatment and wastewater treatment.
3) Appearance: Solid powder, yellow
?

PAC Specification:

Polyaluminum Chloride Packing&Storage:
25kg/PP woven bag with inner plastic bag
The product shall be sealed and stored in the dry and ventilated place to prevent it from rain,high temperature and strong sunlight .The shelf life of product is 24 months.

Polyaluminium Chloride Advantages:
1. Its?purifying?effect?on?low-temperature,?low-turbidity?and?heavily?organic-polluted?raw?water?is?much?better?than?other?organic?flocculant,?furthermore,?the?treatment?cost?is?lowered?by?20%-80%.
2.?It?can?lead?to?quick?formation?of?folc?(epecially?at?low?temperature)?with?big?size?and?rapid?precipitation

?service?life?of?cellular?filter?of?sedimentation?basin.
3.The?dosage?is?smaller?than?that?of?other?flocculants,?which?is?better?for?improving?the?quality?of?treated?water.
4. It?has?widerange?adaptability?to?the?waters?at?different?temperatures?(in?the?summer?and?the?winter)?and

?at?different?regions?(in?the?south?and?the?north?of?China).
5. It?is?suitable?for?automatic?dosing?device?of?alum.
6.?It?can?adapt?to?a?wide?range?of?pH?value?(59),?and?can?reduce?the?pH?value?and?basicity?after

?processing.
?

PAC Usuage:
1.The user can allocate remedy concentration by test and determine the optimum dosage according to different to be added after they are dissolved and diluted.
2.The dilution ratio of liquid product is 5-50% and the dilution ratio of solid product is 2-20%.
3.The liquid product dosage is 3-40kg/1000 tons water and solid product dosage is 1-15kg/1000 tons water.
4.The amount of specific dosing is based on coagulation tests and experiments.
?

Polyaluminium Chloride PAC Spray dry process:

Polyaluminium Chloride Warehouse: