Coriolis Flowmeter, Coriolis Flow Meter, Flowmeter Coriolis

  MaxiFlo™ Coriolis Mass Flowmeter series MCM is a
 mass flowmeter that measures mass flow, density and
 temperature ( volume flow calculated) of liquids ,
 slurries and multi-phase liquids directly without going
 through calculation process based on other variables.
 It has no moving parts in the flow. And it doesn' t
 require any special device for installation and it
 doesn' t require flow profile stabilization, meaning it
 doesn' t require straightener or straight pipe sections
 either upstream or downstream. The wetted parts are
 made of stainless steel and therefore can be used for
 corrosive liquids.
 • High accuracy and precision of 0.1% , 0.2% and
 0.5% of reading
 • Wide turndown ratio
 • Can measure liquids of all types, slurries and
 multiphase liquids ( solids or air bubbles mixed
 inside liquid)
 • Wetted parts are stainless steel and can be used
 for corrosive liquids
 • Mass flow, volume flow, density and temperature
 measurement without additional instruments
 • Measurement accuracy not affected by whether
 laminar or turbulent and there' s no need for flow
 profile stabilization by means of flow straightner
 or straight pipe sections upstream or downstream
 • Minimal pressure loss
 • No moving parts in the flow, longer life and easy
 maintenance
 Measuring Principle of Coriolis MFM
 The mass flow-sensing element is composed of a pair
 of bent tubes, vibrators and displacement sensors. The
 trick here is to detect the Coriolis force applied on the
 tube by the flowing fluid inside the bent oscillating
 tube. In order to do that the vibrators vibrate the bent
 tubes at the natural frequency of the tubes. When
 there' s a flow inside the tubes, the Coriolis force at
 work distorts the vibration of the tubes. This
 distortion can be measured using the displacement
 sensors. The amount of distortion is directly
 proportional to the mass flow of the liquid inside the
 tube. By accurately processing the displacement, the
 accurate mass flow is directly measured.
 Liquids, slurries and multiphase ( liquid mixed with
 air bubbles or solids) can be measured. It boasts
 strong immunity to noise, high accuracy, wide
 turndown ratio, stability and reliability.