Cisco Module HWIC-2T=

Item Number:New Sealed and Original Cisco Module HWIC-2T=

2-Port Serial WAN Interface Card

The WIC-2T provides two serial ports using the Smart Serial connector.

• Asynchronous support with a maximum speed (per port) of 115.2 Kbps, minimum 600 bps. If you need to run at speeds lower than 600 bps, use the AUX port instead.

• Synchronous support with a maximum speed of 8 Mbps per port.

  • Supports one port at 8 Mbps when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.

  • Supports two ports at 4 Mbps each when used in NM-1FE1R2W, NM-1FE2W, NM-2FE2W, or NM-2W, or Cisco 2600 chassis WIC slots. All other WIC ports on that network module or Cisco 2600 chassis must not be used.

  • Supports 8 Mbps on all ports simultaneously on 2691, 3725, and 3745. No restrictions. Maximum six ports at 8 Mbps each.

More Cisco modules in stock as below selling at a very good price,PLS contact me for fast quote.

VWIC2-1MFT-T1/E1=
VWIC2-2MFT-T1/E1=
VWIC2-1MFT-G703=
VWIC2-2MFT-G703=
HWIC-1FE=
HWIC-2FE=
HWIC-1CE1T1-PRI=
HWIC-1T=
HWIC-2CE1T1-PRI=
HWIC-2T=
HWIC-4ESW-POE=
HWIC-D-9ESW=
HWIC-1GE-SFP=